Taking a break

When I last talked about my remote workspace, I was adding a 40" monitor. So I got rhythm, I got music I have good lighting, lots (but never enough) of screen real estate, powered speakers I connect to my phone for music and conference calls… but not all was perfect in my homemade remote worker’s paradise.

We replaced the kitchen island a while back, and the old one is upstairs. I thought about using it as a makeshift standing desk, but that didn't materialize. Worse, it was a tight squeeze between the island and the big monitor, and Charlie banged his head on the corner of the monitor more than once when coming to visit. The only natural light is from a narrow gable, and that was partly blocked by the window A/C unit.

Mason’s fall break ran from Thursday through today, so I took the days off as well, hoping to camp down at the pond again. But with Beta coming for the weekend, bringing about two inches of rain, we decided to stay home. We tackled some of the stuff upstairs, making a little more room. I looked at the gable window, with the A/C blocking a good third of the incoming natural light, and looked at the island.

As Gru would say: “Light bulllllb.”

With an anxious Mason holding up the window, I pulled the A/C out of the window… and immediately got a bath from rainwater not quite drained out of the unit. I also found a few slits in my fingertips, compliments of my wrapping them too far around the back, but toilet paper and pressure took care of that. I borrowed a lid from a large storage tub to put the unit on as I carried it out to the garage to finish draining.

With the collected rainwater down to a few drips, I hucked the A/C out to what was once Studio FAR, but became the wife’s personal storage dump a while back. There was also a tall dorm fridge out there, plugged in but empty, so I unplugged it and carried it into the garage for a quick cleanup. There were a few drips of who-knows-what inside, but the ice buildup needed more than a couple disinfectant wipes to deal with. I got a blow dryer and started melting the ice while pulling at it with my fingers. It took maybe 20 minutes to defrost, and I dried it off and hucked it upstairs. Of course, the island + fridge were about one inch wider than the gable, but the gable outlet is switched anyway. I parked the fridge in front of the island and plugged it into a non-switched outlet.

With the break area ready, I began accessorizing. First came the coffee grinder and espresso maker from downstairs, along with the loose coffee sitting in freezers (and a pint of half&half). I ordered a 0.5l electric kettle, and a French press of nominally the same capacity, and they arrived over the weekend.

So everything was ready to go this morning, when I went back to work. That’s when I found the French press's idea of “0.5 liter” includes neither coffee nor the plunger. OK, so now I know to not fill the kettle quite full. This afternoon, I made a cappuccino for my 3pm power-up.

There will certainly be some other tweaks to the workspace, especially around the exercise equipment. But this is a big step forward. I can look out the window while I’m making coffee, and I don’t have to go back downstairs (with its potential distractions) unless I forget to bring a coffee cup along.

Nuke and pave

I’ve been thinking for a while that the county should either rename our road to Pothole Parkway, or stop playing whack-a-mole with the deteriorating asphalt and get serious about repaving it. And since there’s a lot of bike traffic on weekends, put in bike lanes while they repaved.

Wide and smooth

Mirabile dictu, the universe must have been paying attention for a change. The county is repaving the road… and putting in bike lanes!

Of course, before repaving, you have to de-pave. The results remind me a lot of the dirt roads when I was a kid in southwest Michigan: wide and smooth. Back then, the road commission would run a grader up and down them on occasion, then follow up with a coating of oil. Not only did it keep the dust down, it created something almost as solid as pavement. (They switched to something a little easier on the environment in the late 80s.) I remember piling eight teenagers in a VW Beetle and blasting our way down those roads at around 65MPH, trying to catch up to the people who knew where we were supposed to be going! Every once in a while, there would be a pothole, and some of the passengers would levitate for a moment.

But I digress. With Sally threatening to lay down a huge amount of rain, they panic-paved as much of the first section as they could. That was probably for the best, because the first section includes the steepest slopes (not like there’s any flat sections). We did get a lot of rain, but not the wash-out-road amounts that some were fearing, and most of it wasn’t that heavy. So the work goes on.

They started on the far end from FAR Manor, which is okay. We won’t get disrupted until the last leg. I'm hoping Mason and I will be the first to ride the bike lane all the way from north to south.

Birthday campout

Mason turned 11 on Tuesday after Labor Day, and the wife planned a bash down at the pond (where there are a couple of pavilions, a swing set, and a large grassy area for kids to run loose in). Then she suggested I take the Starflyer down there and camp with Mason.

Hey, why not? I’ve been wanting to get out, and would have if it was just the adults. The whole thing about campgrounds, as I’ve said before, is kids take off and hang out with other kids. It’s awesome, unless there happens to be a pandemic going on. But if it’s just us…

It just popped up here, I swear…

The two-track down to the pond can be treacherous, but this time the washout was all on one side. I kept to the other side, and got it where I needed it. There’s not a 30A connection, so I couldn’t run the A/C, but there’s 15A connections and it only got hot for a few hours during the afternoon. I had fans, and zipped up the screen covers on the sunny side. It was nice and comfortable by bedtime. Sizzle opined that this was more glamping than camping; he had a cabin tent for his boys and strung a hammock for himself. I pointed out that sleeping on a mat on the ground is fine when you’re 30, even 40. At 50… not so much. At 60, forget it.

In the mornings, it was chilly enough that warming up a kettle on the inside stove was a welcome way to get the day started. I keep a French press in the camper for coffee, and Sizzle decided this wasn’t a bad way to camp after a cup or two. I also warm up a second kettle to put in the pump pot—so I have both hot and cold water at the sink for washing.

The birthday party was Sunday afternoon, and several relatives came down to join the fun. I pulled the Porta-Potti out of its cabinet and designated the camper as “the ladies room” for the afternoon. It’s a pretty low sit, so most of the women didn’t try it out. But the niece’s daughter found it perfect, and used it often. (I usually put it in the walkway at night, so nobody has to traipse into the woods in the dark, and it got used that way as well.)

Since Monday was a holiday, Skylar and the niece’s son stayed in the camper with Mason and me. The boys gave me the big end, Skylar got the drop-down bed (in which the dinette table sits on props and holds up the mattress) and the other boys grabbed the small end (and the bunk light with the fan… little rats).

I find that tearing down takes a lot longer than setup. Maybe it’s because my help evaporates, or maybe because I’m reluctant to admit it’s over. But Mason has a 5-day weekend (fall break) at the end of September. I’ve already taken vacation days—so if the weather cooperates, we’ll be back. Hopefully, the wife will join us this time.

Butter sauce: Easiest. Recipe. Ever.

A store-brand box of penne suggested tossing its (cooked) insides in butter sauce, so I had to have a look.

I can’t imagine a recipe easier than this, other than “Peel banana. Eat banana.” (That would be one of Charlie’s favorite recipes, anyway.) Charlie also enjoyed this with pasta (he loves him some pasta).

Ingredients:

1 stick butter (or plant butter, or margarine, whatever floats your boat)
1 T “Italian Medley” herb blend
dash (or three) garlic powder, or 1 tsp (or more… MORE!) minced garlic
1 box pasta

Do the deed:

Cook pasta according to package directions.

Melt butter in a saucepan or microwave. Stir in herb blend and garlic.

Pour over cooked pasta, toss until pasta is coated.

Serve with meat sauce and mozzarella fresca… or take your cue from Charlie and just EAT IT.

Backyard retreat 2.0 (patio to pool)

Ever since we put the gazebo up in the front yard, the old backyard retreat has languished. The fire bowl in the table rotted out, and I’ve procrastinated on rebuilding it. The cushions on the chairs got kind of grotty, and somehow a table (sans top) made its way down there. The rubber tiles were still mostly in place, although a few got scattered out.

But summer + two boys + a pandemic that will probably last through next year got me thinking. We had a small (6') inflatable pool from last year laying around… it had been put up wet, but it still held air and water. We cleaned it up as best as we could and put it on the sidewalk out front (level spots around Sector 706 in general, and FAR Manor in particular, are hard to come by).

All well and good for the kids, but what about the parents? Some poking around Amazon turned up several candidates. So… where would we put it? We need something mostly level.

Oh. The old retreat. But I didn’t want to just drop the pool on the bare ground… the soil around here grows rocks, and I figure it wouldn’t take long for a sharp rock to punch a hole in the floor. The elder sister in law had an above-ground pool at her old place, and fire ants chewed through the floor when the rocks wouldn’t do the job, so “slap directly on ground” was right out.

My first thought was to build a low deck, but I calculated the pool would weigh about 5 tons. I overengineered a deck at our old place, but I don’t know if even it would have supported that much weight. We then considered pouring several inches of sand into the space, or even concrete, to get a flat surface. Given the location, there would be a lot of grunt work involved with concrete: we would have to either carry 100 bags down there, mix it and pour it, or find a concrete company who could maneuver a truck up the driveway and send the slop down a chute. Seeing as I simultaneously tweaked my back and horked my (supposedly good) knee last week*, ironically while bailing water out of the small pool, paying to have someone else do the grunt work would have been the best idea.

Finally, we decided it would be best to smooth out what we have now, cover the Envirotiles with a tarp to protect the pool from ant attacks, and cover it with a pergola.

Patio area, cleared. (Phase 1)

So I took the boys down to the patio Sunday afternoon, and we got everything moved out. Charlie did his best to help, picking up a plastic chair and dragging tiles over to our stacking area. Mason was less enthusiastic, but did a lot of the work. I raked out remaining debris, and tried to level out high spots. I sprayed the whole area with Roundup to discourage plants from trying to slip between the tiles… but, as it turned out, most of the growth was in composted leaves that hadn’t been swept away in a long time.

Given the pandemic, large pools are going for a premium. We ordered a round 10' pool (with filter) for $300, and the same pool was going for $100 pre-pandemic. But even at COVID prices, the pool itself is the least costly part of this project.

The pergola, at $1600, is actually the priciest component. Wayfair is now telling us it won’t be delivered until August (after saying it was in stock when the wife ordered it), but August is when we'll need it most.

The boys laid tiles.
And did a pretty good job of it.

Next step: smoothing out the dirt. Nine years of rain, frost, erosion, and roots had lifted some spots and sank others (most of the sinking was along the south edge, where things do drop off). Last month, Mason and I replaced the rotten fascia boards across the front of the detached garage. One of the original boards was still good, for most of its 16-foot length, and it’s nice and straight.

We dragged it across the dirt to catch high spots, and I scraped them down with a shovel and tossed the dirt into low spots. It’s not perfect, but more effort won’t be worth the return. I swept dirt off the tiles, handed them to Charlie, and he carried them to Mason, who put them in place. Both of them were a big help—but of course, both of them want the pool going!

With the tiles down, I put the tools back in the garage and got out the leaf blower. There were leaves around the margins, and dirt on the tiles (kicked up when I frisbee’d a few tiles down to Mason).

Just add tarp (and pool… and yes, water). (Phase 2)

At this point, we just need to get a 10x10 foot tarp to lay over the tiles, then we’ll be ready to put the pool in place and start filling it. I estimated we’ll need about 1400 gallons to fill the thing—in other words, we won’t be able to fill it all at once. I’m thinking about tapping the downspout on the rain gutters, running a flex-pipe down to the pool, and catching any debris with screening… or seeing if bulk water delivery is reasonable.

I figure we’ll be able to use it through September this year, and all summer next year. Once the pandemic is over, we’ll still have the option of not driving 15 (or 40) miles to go to a pool.

Stay tuned for the completed project!

Are you restructuring your yard for an extended shelter-in-place? Comments, as always, are open!

---

*Both back and knee are around 90% of full-function right now, which is a dangerous zone. Just because they’ve subsided to a low-level ache, instead of stabby OUCH pain at random (all too short) intervals, doesn’t mean you can safely hoist 60lb bags of concrete at will… even if you think you can. My back is letting me know I was pushing my luck just cleaning off tiles this evening.

Oh deer! (redux)

Somehow, we as a family have been fortunate when it comes to deer encounters. This one marks the third occasion that a deer and one of our cars have attempted to occupy the same point in space, without damage to (at least) humans and vehicles.

Last week (Monday, of course), Daughter Dearest was heading back from the church to her house. Just beyond the church driveway, of course… a doe and its fawn decided to play a live-action version of Crossy Road, using DD as an NPC. Unlike non-players in Crossy, DD stood on the brakes, and the doe scooted on by. The fawn… not so much.

There, there…

Fortunately, at this point, she was going slow enough to bonk the fawn and tumble it a few times. For all her ferocity with people, DD has an extremely tender heart when it comes to animals. So she gathered up the four-legged victim (which was unable to get its own act together) and carried it up to the church porch.

From there, she called her mom (totally upset), then the DNR. The latter was busy trying to deal with a bear keeping someone in her car* so the two of them sort of comforted each other while Wildlife Rescue got its act together.

The DNR people got there, and assured DD that the fawn wasn’t severely damaged—no broken back, at least. With any luck, they’ll fatten it up for Thanksgiving dinner reunite it with its mom shortly.

Of course, wife and I were concerned first with DD, and then with her car. Both were fine. Wife opined: “She can hit a deer and not have any damage, but hitting a groundhog tore out half the underside of the car!” Well, this is Sector 706… logic is neither common nor appreciated.

*Probably not the same bear I encountered Friday night. That one has been sneaking up to the manor, on dark nights when we forget to drop the garage door, and gobbling an entire 40lb bin of dog food. I happened to be on a late-night grocery run, and probably startled him off as I pulled up the driveway, since the bin was just outside the garage. Turning on the floodlights, I saw him standing there on all fours in the back yard. After I cussed him out and banged on the plastic garbage bin (empty because of him), he shuffled into the woods. The dogs, who usually lose their shorts when a strange car comes up the driveway, amazingly didn’t say boo about a freeking bear coming up to visit. Then again, as I’m fond of saying, “stupidog” is one word.

Impending: screen tan

I’ve been plugging along in my new work space for a couple of months, now. A couple weekends ago, while taking some time off, I did turn the light fixture 90° as threatened, and my gorgeous face is now lit up much better during videoconferences. :P

One thing that has chafed me about the homegrown workspace… I had two large monitors at work, side by side. At home, I had the laptop screen and a 17" NEC monitor that Solar gave me a few years ago. The work monitor mount was integrated with the cube/desk, and I didn’t have the time or inclination (at the time) to figure out what to do with them. I’ve made do, but wanted a little extra.

I am SO buying these socks for her.

Well… let me preface this by saying I’m not trying to criticize in any way. We all have our own ways of coping with the pandemic (not to mention The Boy checking out in August), and maybe her watching the Hallmark Channel for hours on end is healthier than me sitting at the computer and drinking myself stupid most nights.

Anyway, The Boy left us a 40" Sony TV. Wife wanted to upgrade our 32" Samsung for a while, and got someone to swap TVs for her when I was occupied doing something else (i.e. upstairs working). All well and good, except that the Sony’s HDMI2 input was boogered somehow. We used HDMI1 for the satellite connection, and #2 is the DVD player. We would see the DVD player's startup screen, then it would go black and not respond to pretty much anything but an input change.

Long-time readers know that the wife’s idea of troubleshooting is to go for the most expensive/time-consuming fix. Without my knowledge or input, which is fine if she used her own money, she bought another 40" TV. A Vizio, this time, which is fine. I don’t exactly trust Sony to keep its mitts out of my LAN. But I digress. There was something about a new wall-mount involved, and I dragged out the tools.

A while back, someone left a DeWalt driver/drill at the manor, with a 20V battery. I bought a charger and a spare for it, and I’ve used it for a couple of two-minute projects… then the parsonage’s back deck needed resurfacing. I brought it along, and it tore through that job like it was SARS-COV-2 tearing through immunocompromised lungs.

But I digress. The driver also made quick work of the wall-mount, and the Vizio was playing Hallmark movies in well less than an hour.

BIG screen!

That left me with an extra screen, a need for it, and a specific set of circumstances. The old wall-mount was great for the living room corner, but I needed something that went sideways from a wall, over my desk. Dragging out the measuring tape, I found that 18"-24" would give me plenty of clearance. Off to Amazon I went, quickly found a wall-mount arm with 24" of clearance, and ordered it. It arrived today, and I hucked it and the toolbag upstairs.

It took longer to mark the holes than to drill pilot holes, and to drive the bolts into the studs. It makes SUCH a huge difference to have good tools. In a manner of minutes, I hung the monitor on the mount, routed cables, and plugged everything together. The laptop’s dock has an HDMI connection, and I happened to have a stray cable laying around… presto, a humongous 1920x1080 monitor!

Maybe now that I have the hardware in place, the employer will spring for a 4K monitor… ha. I'm trying to decide whether to return the 17" NEC monitor to my bedroom desk. It might be useful for side jobs. After all, you can’t have too much screen real estate.

To disc, perchance to golf

I was tempted to file this one as pandemic-related, but it was more of a “last straw” thing than a completely isolation-related incident.

Disc golfing has been around for a while. I remember going to a park in Grand Rapids, with Other Brother, when we were either nearly done with high school or just starting college (so, 1977, give or take a year or two). Back then, everyone called it “Frisbee golf” and played with backyard discs. The goals were usually posts that you tried to hit with your disc.

Portable goal

I enjoyed it, but college, a move to Planet Georgia, and doing other things caused me to lose touch with the sport. It was only after I went to see The Boy in Manitowoc that I started to reconnect. One of the parks has a disc golf course, and he had taken it up. We got me a disc (there was a shop near the park that sold a variety) and had a blast. By then, of course, the official goals (or holes) were now baskets with vertical chains, like in the pic here. Except, of course, actual courses have their goals sunk into the ground to prevent mischief.

The vagaries of life kept me from taking it up much, partly because I didn’t know of any nearby courses. But when The Boy returned to Planet Georgia, he quickly found two courses 15 and 25 miles away. I bought a “starter pack,” four discs with varying flight characteristics and a carry bag, and I added my Manitowoc disk to the collection. When The Boy took his longest journey, Mason (who also likes to disc golf) and I got his bag. Mason has mostly taken it over, but I picked out one or two to round out my set.

Backyard goal

Now, with parks closed (or if they aren’t, it’s still iffy to go), I decided it was time to work with what I have—a large-ish yard with lots of obstacles—and ordered a pair of goals. I put them at opposite corners of the house, and chose some tee-off spots. I have a four-hole course: the first two counter-clockwise around the house, the second two clockwise.

The course, given the limited space I have to work with, rewards accuracy much more than raw power. Tee shots require threading a needle between trees, bushes, and the house. I’m getting noticeably better.

Going online, I’ve also learned a little about flight characteristics, and what to expect from a disc when you throw it. That has improved my game as well. Now I can step outside at lunch and throw two or four holes, depending on time constraints, and then play a little more once I’m done for the day.

Weather permitting, of course. It has been raining a lot in the last couple of months.

Life and Work in the Time of Pandemic (part 4, workspaces)

Planet Georgia's sorry excuse for a governor partially lifted the shelter-in-place, starting today. That’s going to have consequences in late May, for sure. Nevertheless, we got an email from work that said, in effect, “yeah, we know, keep working at home.”

Things I needed to set up a workspace arrived this week, and I found some other necessities in the garage. So after I sent my reports this afternoon, I got to work. After clearing the space, I vacuumed the (horrid) carpet.

We’ve been using The Boy’s old room for storage for a while. Clearing out a corner wasn’t all that difficult, but lighting has always been an issue. The house is a Cape Cod, and the only window in each upstairs bedroom is in the gable. I ordered a 4-foot LED fixture and power cord, and mounted it on the sloped part of the ceiling. Plugging it in yielded plenty of light, enough for most of the rest of the room. I used an old wire shelf hanger hook to keep the cord up against the wall.

Now for the furnishings. Daughter Dearest’s old office chair was sitting in that corner, and I found an old typing desk in the detached garage. Of course, it was all the way to the back, and covered in stuff (including lots of dust and grime). Fortunately, it was light enough for me to lift and carry by myself, and I hucked it across the driveway before wiping it down. I really need to hit the metal parts with a wire brush and repaint it, but that can wait.

With the desk mostly cleaned up, I hucked it up the stairs and dropped it in place. I grabbed the bag of gear (dock, keyboard, mouse) that I got from the office back when they first told us to not come in, and took that upstairs. To my delight, there was also a power strip that I’d forgotten about. Finally, the laptop and my second monitor went on up to make the final connections.

Another garage find—a big monthly planner whiteboard—was the last piece. We have a little container of picture hanger hooks, and there was a length of wire as well. I put it together, and there was already in a screw in the wall at just the right height. Incidentally, it covers a bunch of marks, so it wins twice.

It’s not quite done yet, even if it’s usable as a workspace in its present state. I plan to put some hooks under the front of the desk to neaten up the cabling, for starters.

Longer term, the wife wants to replace all the carpeting in the room and paint the walls. When that happens, I plan to use whiteboard paint at least in that corner. Maybe I’ll replace the cord with house wiring, to get it out of the way.

Come Monday, I’ll be a lot more comfortable about turning video on for our many conference calls than I have been in the past. I could also put pithy messages like “Approvals needed ASAP” on the whiteboard behind me, to enhance my presence.

Life and Work in the Time of Pandemic (part 3, school)

We’re on spring break this week… like I said in the last post, we were supposed to be at the beach, but having to cancel a vacation falls into the #firstworldproblems bucket.

The two-week “online learning” got extended to next week… then just before break, they finally realized the wisest course was to finish out the school year online. It’s a pain in the rear, but better that than getting a bunch of people sick without need (or the resources to take care of them).

I need to say, the school system obviously meant the whole online learning program to be something used once or twice over the winter, maybe for a few days. Now they’re having to adapt it for a months-long outage. My biggest beef with it is that they couldn’t settle on a single app or website to manage everything—there are three or four apps/sites, and they occasionally roll out another one. Although my Mac has a built-in password manager, I’ve gotten account fatigue over the years. So every time I get a memo about Yet Another Account to set up, they can hear my eyes rolling all the way out here.

“Out here” presents its own online learning issues. This is farm country, and I still think it’s amazing we have DSL. It usually works OK, unless heavy storms take out a line card (which happens pretty often)… or everybody who can work at home is doing just that and their kids are also online trying to do their schoolwork. It gets where the connection can’t even support a low-bandwidth music stream. I can do the normal work things—email, edit a DITA file from the cloud, chat—because that traffic is mostly short bursts and can slide in between the school traffic. Conferences are more iffy, but I usually use my cellphone for audio and the video is showing mostly static images of spreadsheets or documents.

But I digress. Our school is swimming against the Zoom current (an app I only heard about after the isolation began) and using Google Meet (aka Hangout). We can often manage one hangout at a time, or at least phone in if bandwidth is an issue. Charlie’s therapists (and pre-school) is also using Meet. Most of the time, this seems to work out. The bandwidth is hitting Daughter Dearest even harder, because she’s a teacher and has to be online. It got so bad that she simply bypassed the wheezing DSL and used her phone to get out. Needless to say, that burned through our data cap, our reserve, and then some. Now we don’t have a cushion for this month. I suggested she go to Dunkin', get a coffee and maybe a doughnut from the drive-thru, then sit in her car and scarf the Wi-Fi from there.

Often enough, our connection is marginally good enough, so DD and her kids have been at the manor most school days. That means I’ve had AJ (or Charlie) in my lap more than once during a conference call. I can totally derail a meeting by turning on my camera with either one; they’re both cute.

While we’re on break, I’m trying to set up a place in the larger upstairs bedroom (The Boy’s old room) as an office space. We made some headway yesterday. But I can’t help but think that once I get upstairs, all the kids will wander (or be sent) upstairs so I can still deal with something. I guess that’s okay, as long as I hold my end up at work. So far so good!

How about you? Have you torn a bumper sticker off your van yet? Comments are open!

Staycation, pandemic-style

We were supposed to be in Florida this week, hanging out with Mom and hitting the beach. Instead, we’re at FAR Manor.

Over the weekend, I finally got the new front derailleur on the Fuji dialed in. Hooray, time to take a ride! Um, no. The rear inner tube had partly separated from its stem. Well, Solar had suggested I put wider tires on it to improve the ride, anyway. There’s not a lot of clearance at the front fork, but thought maybe I could go from the current 25mm width to 32mm. I have a pair of 47mm tires, but they’re definitely too wide and the wrong diameter anyway. So I made plans to run over to the bike shop on Monday, and maybe get Charlie a bike with training wheels. Meanwhile, Skylar’s bike (the one he has here) needed shifting and braking adjustments. I got him rolling as well.

In the vein of “don’t go out unless you have to,” I called the bike shop before going. Nope, the shop guy opined, there’s not enough room. And they didn’t have any Charlie-sized bikes in stock. I thought we had a small frame laying around, so instead of driving to another bike shop I thought I’d try to Frankenstein a bike from bits and pieces.

Needs a little cleaning along with training wheels

Instead, I found an entire bike with a 12” frame! It was one Mason had for a while, until he outgrew it. The tires, amazingly, still held air. Some WD-40 got the chain loosened up, and I regreased the bearings on one wheel. So it rolls, it pedals, and the coaster brake works. I ordered a set of training wheels, and almost added a Trailgator (basically a towbar to pull his bike behind mine). The price—$65 for a metal bar with clamps on either end—put me off, though. Anyway, I raised the seat an inch and it fit Charlie perfectly.

All that, actually, was in between the ceiling fans. Daughter Dearest had ceiling fans for each of the kids’ rooms (three in all), and asked me to put them in because Sizzle is still working while the rest of us are on spring break. I succeeded, only after multiple trips back to the manor to fetch hardware, tools, and at last I had enough and brought everything. That turned out to be the way to go, and the fans are all happily spinning away.

I mentioned Skylar… he’s been spending weekdays at the manor because his nominal guardians are both working. He brought his bike up (the one I adjusted) over the weekend, and an HP laptop. “Do you have a cord for this?” he asked, repeatedly, until I told him to knock it off and let me do it when I had a chance. Before the fans, I scrounged a power cord and had to shave a little off the female end to make it fit in the power supply. I pushed it in, using as much force as I dared, and a light came on when I plugged it in. He wanted to start it right away, of course, but I told him to give it a few hours to let the battery get charged.

Finally, after everything, we started it. Black screen, and the Caps Lock LED was flashing. I realized it was a pattern—three long, two short—and I looked it up. Memory error. “Well,” I told myself, “it hasn’t been run in a while. Maybe if I reseat the RAM, it will be OK.”

So I flipped it over, opened the little door on the bottom, and… no RAM at all! I found out later, from Skylar, that a house guest had scrounged the single memory stick to put in his own computer. Nice guy. So I couldn’t reseat the RAM, but I had a 4GB stick on my desk from when I upgraded the iMac. It looked to be the same style, so I used the “cat in a box” formula: if it fits, it sits. I buttoned it up, plugged it in, and hit power. It coughed to life and displayed a login screen for the Microsoft thing. Yuck. Of course, I didn’t have the PIN it requested, although I tried some of the common ones (1234, 9999, etc). I configured the BIOS to boot from a USB drive, stuck one on and rebooted, and I soon had a Kubuntu desktop. Things seemed to be working properly, and exploring the hard drive suggested there was little or nothing (besides the OS and apps) on it. Skylar thinks his grandfather (Big V’s widower) knows the PIN, so he should soon be off and running.

So that was my first day of staycation: mostly fixing other people’s stuff. But I’ll soon have a new inner tube for the Fuji, and I’ll at long last take it on its shakedown cruise.

Life and Work in the Time of Pandemic (part 2, food)

Coronavirus (image credit: CDC, public domain)

Our “online learning” was extended through Spring Break, the first full week of April here, and they should probably close out the school year doing it. I suggested that to Daughter Dearest, and her response was “SHUT UP. SHUT UP.”

But whether we pull a Hong Kong and lift restrictions early (spoiler alert: it would be a Bad Move), or keep movement tamped down to prevent further spreading, the occasional grocery trip is a necessity. Maybe less necessary is occasional pickup from restaurants, although they might argue the “less necessary” part.

Restaurants are adjusting as well as they can, offering incentives like extra points for rewards programs or free delivery. Meanwhile, the wife and I have roughed out meal planning. We’re mostly digging meat out of our freezers, although we're short on ground beef and the hoarders (aka #covidiots) grabbed it all last weekend. Bread and milk are easier to find, now… both have a finite shelf life and hoarders might have a hard time using what they have before it spoils. Ground beef should soon be available as well, because even covidiots have only a finite amount of freezer space. (But they must be using all that toilet paper as mattresses.)

Meanwhile, the school system is still running the bus routes… except instead of dropping off kids in the afternoon, they drop off lunches in the late mornings. We don’t need the extra food, but they beg us to take it because we’re at the end of the route. Today, we got burgers. The kids eat whatever sandwiches are provided, but sometimes skip the veggies + ranch dip packages (add 1/4 tsp of onion powder to the ranch containers, instant chip dip). We’re going to cook the veggies for supper, if I keep my mitts out of them. Still, it’s starting to get overwhelming—we’re covered up with fruit, milk, juice, etc. We’ll need to make sure the neighbors get some of this if it continues.

Since the kids don’t drink all the milk, I have rediscovered the joy of drinking half-pints of chocolate milk from the carton. I have not yet tried my old trick of jabbing the side with a pencil, making a hole of the exact diameter of a straw; I could pressurize the carton and pump the milk into my mouth. One of my better memories of elementary school.

Fortunately, Charlie is expanding his protein sources, although he still strongly prefers his latest adoptions to be breaded and fried. Chicken nuggets (especially Chick-Fil-A) and fish sticks are winners. We thawed and baked a slab of salmon I had kicking around in the freezer earlier this week; the adults ate that, and Mason and Charlie gobbled several helpings of sticks. We got these corn dog bites, and Charlie ate half of one before he realized it wasn’t chicken, then ate the breading and left the mystery meat. Sometimes, it’s hard to tell the difference between picky and intelligent.

We have a few days of not-rain this week (yay!) so I’ll likely pull some ribs out of the freezer and smoke/grill them.

Life and Work in the Time of Pandemic (part 1)

Coronavirus (image credit: CDC, public domain)

Local schools are on “online learning” this week (and I’m sure that will be extended). I started working from home last week, and we all got a “recommendation” from a manager to work at home through March 27 (again, it’ll probably be extended). Oddly enough, Charlie’s daycare (a Petri dish if I ever saw one) is remaining open. His therapy office is also open, but they’ve moved the waiting room out to the parking lot… in other words, wait in your car until your therapist comes out. Our little church has moved its sermons online (unfortunately, to the Book of Face, which I don’t use) for the duration.

You’re probably seeing the same things in your locale, and I’m not here to provide dry statistics. I’m going to journal the mostly self-isolated life in a rural area, in case someone else finds it interesting now or later on.

Long-time readers might remember FAR Future, a long blog-novel I wrote starting all the way back in 2007. Although the chronic energy shortages that the whole story is built around have yet to materialize, some of the things I wrote about have had eerie parallels in real life. One episode (written in Sep 2008) discusses a serious flu pandemic, with a 3%-5% mortality rate, breaking out in… December 2019. We’re not laboring under a junta, but the administration in real-life 2020 is every bit as incompetent as was the junta in FAR Future. The difference is, the fictional flu was like the 1918 pandemic, hitting young and healthy adults the hardest. This one goes (mostly) after the elderly. We also have the Internet, a find way to find information (and plenty of misinformation) about what’s happening.

Saturday was “run errands” day, so I combined the trips to limit time out and contacts. Charlie had horse therapy, and we needed both some groceries and a UPS battery. Other than that, we were in all weekend. Wife and I keep talking about meal planning, so we can order pickup from the local Kroger, but haven’t quite done it just yet. Today, she’s out with Charlie for therapy. I’m not sure he’ll go to daycare today. If he does, I might run to the office to grab a laptop dock and some notes, then pick him up on the way back.

These first few days of (mostly) shelter-in-place are very strange. It’s like a winter storm, except that all the utilities are working and the roads are even more clear than usual. Our crappy DSL is crappier than usual, what with all the school kids with Internet doing their work online (not to mention people like me, trying to work). Structure is going to be important… along those lines, Daughter Dearest forwarded me a suggested schedule for families. Modify as needed, but a little structure will make everyone's day go better:

Meanwhile, I have a minor cold. I’ve never been so glad to sneeze.

Adventures of a #techcomm Geek: Match Game, 2020

It’s been a while since I did one of these, and this one goes in deep.

We’ve been using DITA at work for a year or two now, but rarely is there time to go back and take advantage of the things it offers, retrofitting those things into the documentation we brought in. (Docs we’ve created since then seem to get more thorough treatment.)

One of those things is reuse. It’s easy to reuse an entire topic in a different book—even if it was duplicated. “Hey,” says a writer, “that’s the same thing. Let’s throw away topic B and use topic A.”

DITA also supports reusing common paragraphs in two or two dozen topics, but that’s a little harder. First, you have to recognize that paragraph. Then, you have to create a new topic (a collection file), copy the paragraph into the collection file, and assign it an ID. Then you have to replace the duplicated text (in topics) with a content reference (a/k/a conref). It’s a worthwhile thing to do, because you might say the same thing slightly differently otherwise. Still, who wants to go through an entire book (or worse, set of books), looking for reuse candidates?

Of course, you can always let a computer do the tedious work… if you know how to tell it what to do.

Preparing the (searching) grounds

A while back, I wrote my first useful Python scripts. One takes a particular JSON file and reformats it as a DITA reference topic, containing a table with the relevant data from the JSON file. Another walks through a CSV file, grabbing the columns I need, and producing topics documenting a TR-069 data model. Both scripts take advantage of a vast library of pre-written code to parse their input files.

It occurred to me that, if I were to find (or create) a way to export all the text from a DITA book into a CSV file, I could use a Python script to compare each paragraph to all the others. Using fuzzy matching would help me find “close enough” matches. That was a while ago, because I bogged down on trying to get properly-formatted text out of DITA.

Last week, I got bored. Someone on the DITA-OT forum mentioned a demo plugin that translated DITA to Morse code, and the lightbulb in my head went on. If I could modify that plugin to just give text instead of -.-. .-. .- .—. then maybe I’d have what I needed.

It was an abject failure. What I need is one line per block element (paragraph, list item, etc). What I got was one line for the entire topic, sometimes with missing spaces. I put that aside, but realized that DITA-OT can also spit out Markdown. If I could convert Markdown to plain text, I’d be ready to rock!

So you want to convert DITA to Markdown? It’s easy, at least with the newer toolkits:

dita --format=markdown_github --input=my.bookmap --args.rellinks=none

The DITA-OT output continues to be topic-oriented, writing each topic to its own file. That wasn’t quite what I wanted, or so I thought at the time. Anyway, we have Markdown. How do we get plain text out of it, with each line representing a block element?

Turns out that pandoc, the “Swiss Army knife for converting markup files,” can do it:

pandoc -t plain —wrap=none -o topic.txt topic.md

In the heat of problem-solving, I realized I didn’t need a CSV file… or Python. I could pick up Awk and hammer my nails the text into shape. My script simply inhaled whatever text files I threw at it, and put all the content into an array indexed by [FILENAME,FNR] (FNR is basically the line number of paragraphs inside the file). There was a little stray markup left, not to mention some blank lines, and a couple of Awk rules threw unneeded lines into the mythical bit bucket.

Got a (fuzzy) match?

A typical match is an all or nothing Boolean: you get true (1) if the strings are an exact match, or false (0) if they don’t.

Fuzzy matching uses the universe of floating-point numbers in between 0 and 1 to describe how close a match is. It’s up to you to decide what’s close enough, but you usually want to focus on values of 0.9 and higher. And yes, an exact match still gives you a score of 1.

Why do we want to do this? Unless content developers are really good about cutting and pasting in a pre-reuse environment, inconsistencies creep in. You might see common operations described in slightly different ways:

Click OK to close the dialog.
Click OK to close the window.

So along with flagging potential reuse candidates, a fuzzy match can help you be consistent.

Python and Perl have libraries devoted to fuzzy matching. There are several ways to do a fuzzy match, but one of the more popular is called the Levenshtein distance. There's a scary-looking formula at the link, but it boils down to single-character edits (addition, deletion, or replacement). The distance between “dialog” and “window” is 4 (d→w, a→n, l→d, g→w).

But this is an integer, not a floating-point number between 0 and 1! But that’s easy to fix. If l1 and l2 are the lengths of the two strings, and d is the calculated Levenshtein distance, then the final score is (l1+l2-d)/(l1+l2). In the above example, the score is 0.93—the strings are 93% identical.

There are websites with Levenshtein distance implementations in all sorts of different programming languages, although the ones written in Awk are not as common. But no problem. Awk is close enough to C that it’s simple to translate a short bit of code. I picked the second of these two. There was one already written in Awk, but it took a lot more time to grind through a large set of strings.

Save time, be lazy

The time it takes is important, because it adds up fast. Given n paragraphs, each paragraph has to be compared to all the rest, so you have n² comparisons. A medium sized book, with 2400 paragraphs, means 5.76 million comparisons. Given that a fuzzy comparison takes a lot longer than a boolean one, you want to eliminate unnecessary comparisons. A few optimizations I came up with:

• It’s easy to get to (n²-n) by not comparing a string to itself. We also do a boolean compare and skip the fuzzy match if the strings are identical. Every little bit helps. Time to analyze 2400 paragraphs: 2 hr 40 min. My late-2013 iMac averages about 600 fuzzy match comparisons per second.
• By deleting an entry from the array after comparing it to the others, you eliminate duplicate comparisons (once you’ve compared A to B, doing B to A is a waste of time). That eliminates noise from the report, and cuts the number of comparisons required in half. Time to analyze 2400 paragraphs: 1 hr 20 min. Not bad, for something you can do with one more line of code.
• Skip strings with big differences in length. Again, if l1 and l2 are the lengths of two strings, then the minimum Levenshtein distance is abs(l1-l2). If the best possible score doesn’t reach the “close enough” threshold, then you don't have to do the fuzzy match. Time to analyze 2400 paragraphs: 5 min 30 sec!!! Now that’s one heck of an optimization!

So we’ve gone to something you run overnight, or at least during a long lunch break, to something that can wrap up during a coffee break (eliminating 96.5% of the time needed is a win no matter how you look at it). Now if your book is all blocks of similar length, it will take longer to grind through them because there isn’t anything obvious to throw out.

Still, this is down to the realm where it's practical to build a “super book” (a book containing a collection of related books) and look for reuse across an entire product line. That might get the processing time back up into the multiple-hours realm, but you also have more reuse potential.

Going commercial

The commercial offerings have some niceties that my humble Awk script does not. For example, they claim to be able to build a collection file (a “library” of sorts, containing all the reusable paragraphs) and apply it to your documentation. That by itself might be worth the price of entry, if you end up with a lot of reuse.

They also offer a pretty Web-based interface, instead of dropping to the command line. And, they have likely implemented a computing cluster to grind through huge jobs even faster.

But hey, if you’re on a tight budget, the price is right. I’m going to make sure the employer doesn’t have a problem with me putting it up on Github before I do it. But maybe I’ve given you enough hints to get going on your own.
UPDATE 10 May 2020: The script is now available on Github.

Mooooving out

I called him Buncha (as in Buncha Bull). Mason called him Bully. The young woman that helps the wife out with farm stuff called him Carl (Carl?).

Whatever you call him, the time came for him to moooove back to the pasture. Wife put a halter on him, handed me a lead (basically a really heavy-duty leash) and told Mason and me to walk him down to the pasture.

So down the garden path we went. We brought his milk bottle along, just in case. The calf was both excited and nervous about this Really New Thing, and spent the entire walk alternately planting his hooves or trying to frisk ahead. But despite him weighing well over 100 pounds, he didn’t pull as hard as a 30 pound Aussie Shepard.

The pasture is calling
and I must go.

We got to the pasture. I unclipped the lead and let him go, then slipped through the gate. He stood there, looked around… then stepped through the barbed-wire fence like it wasn’t even there. As Mik’s Aunt Morcati said, cattle are born knowing all profanity and will gladly teach it to anyone nearby.

So I waved the milk bottle at him, he ambled over and chowed down, and I clipped the lead back on him. Now what? I thought. I can’t stand here with him forever.

Finally, I decided to take him further into the pasture. Riding a milk high, he was glad to follow my lead (the one attached to his face via the halter). About 50 yards in, I unclipped him and backed away to see what happened next. He munched on a big clump of grass, then looked up and got this look about him. It was almost like it dawned on him: This is my place, and that’s my herd. The pasture is calling, and I must go. He walked up the hill, found some other calves around his age, and they included him right away.

It’s not like he’s completely gone… he still has the halter, so we can spot him in the herd and bring him an occasional bottle. Like this:

He still comes trotting over when he sees us… or at least sees his bottle. So we don’t have to miss him. Especially since another calf is now in the pen. It never ends at FAR Manor.

The great flopover

Today began the way it often does through the week: wife putting AJ next to me on the bed while she gets Mason on the bus. Today, AJ seemed anxious to be self-propelled; she squirmed and grunted on the bed until I put her on my chest. She’s 3 months old now, and even crawling is another entire lifetime away. It has to be frustrating, to be a curious rugrat and have to depend on the big stupid giants to figure out what you want to do or where to go.

I was working at home today, so I took Charlie to daycare and picked up some breakfast on the way back while the wife tried to keep AJ content. They hung out most of the morning, because I had a call I needed to be on from 10 to 11:30… but then it was lunch break. I took AJ, and let the wife scarf her egg and cheese croissant.

As I’ve said before, AJ is a lot like Mason—she likes to be walked around. I can also keep her occupied for a little while by turning on the ceiling fan in the bedroom; she loves watching it go 'round and 'round. But I walked her around a little more, and she zorched out. I laid her in the bassinet (on her tummy) and went back to work.

About half an hour later, the wife called down the hall: “Did you lay her on her back?”

“No,” I replied.

“Then she rolled over!”

I had to text Daughter Dearest with the news. I missed it :(, she replied. Get video!

Getting video was easier said than done, because AJ only flipped onto her back (she did it twice through the day) after waking up. So when DD came to pick her up, she really wanted that video…

(I cut out a lot of DD encouraging the flopover in a very squeaky voice.)

BTW, don’t suggest to DD that her laying on the bed made it easier for AJ to roll over.

Bedtime follies

Getting Charlie to go to bed can be a crapshoot, especially if he hasn't had a lot of outdoor time to wear himself out… or if he has a cold.

Most nights, I'm the one who gete his pajamas on. As I am ever a hopeful soul, I’ll ask him, “are you ready to go to sleep?” He nods, which is a gigantic lie, but I'll put a blanket on him and turn off the light. Usually, he jumps out of bed after a couple minutes and does his thing until one of us reels him in and settles him down.

But yesterday night, he didn’t jump out of bed right away. After a short while, the wife called down the hall: “Is Charles with you?”

“No, I put him in bed…” Is it possible? I thought. Maybe he went to sleep! 

I went to his bedroom, and waited for my eyes to adjust. I saw a dark shape on the bed, and touched it… too soft. It was one of his stuffed bears. I felt around some more, then finally gave up and turned on the light.

And there was Charlie.

Sitting cross-legged up in the corner of the bed.

Stark naked.

Diaper at his side, pajamas a little farther away, socks at the foot of the bed.

Seriously. I have no idea what his thought process was for this… was he expecting me to find him like that? Or did he plan to sleep in his all-in-all? Or (more likely) would he have shortly wandered into the living room to make the wife wonder what he was thinking?

I re-assembled his nighttime ensemble, and put him in my bed until he gave up and zorched out.

That was one of the more off-beat things Charlie has done in his nightly battle against the Sleep Monster. It makes me wonder what he’ll do to top it, later on.

Done!

After all the hearings, the forms, the interviews and evaluations, the end was almost anti-climatic. We went into a conference room, the judge swore us in, and asked us if we still wanted to go through with it. He signed a paper and said, “It’s official.”

Charlie is now our adopted son.

The judge was happy to stand with us and get a pic. He said, “Adoptions and drug court graduations are the best part. Everything else can be kind of sad.”

Our second family (plus the judge and AJ)

There’s still stuff to deal with, including getting Charlie’s updated birth certificate and changing the name on his Social Security card. And the adoption assistance will take over from the foster stipend to cover Charlie’s therapies and the like.

I took the day off, and we kept Mason out of school so he could be part of the final ceremony.

Then I got to thinking… if Splat (Charlie’s bio-dad) is his cousin, does that make Splat his own uncle? Well, family trees in this part of the country do have their share of tangled branches…

Mooooving along

When you live in a free-range insane asylum, you never know who (or what) is gonna show up next, looking for a little living space…

I guess this is the season for calves, because the wife has been talking about all the new babies out in the pasture lately. But, it seems like one of them had some issues… not so much the calf itself, but the mama. Here’s a mental image you won’t see often, in two words: prolapsed uterus.

However it was, the mama didn’t make it. That meant catching the calf, which is usually just a matter of letting it hang out for a day or two until it’s too weak to run away, then bring it to an enclosure where we can feed it. Lief, who was The Boy’s dog, got displaced from his pen and moved back to a tree and doghouse so the calf could have a place to live. The first day or so was… interesting. We had to pin him against a corner, then get him to figure out that the bottle had foooooood. After exactly one of those ordeals, he got the idea and was glad to see us coming.

Slurp… uh, eet mor chikin… Slurp

A week or two later, and he's pretty much a really big doggie. He’ll slide around your legs, looking for the bottle, and has figured out he needs to let go on occasion to equalize the pressure.

Mason helped me out one evening. “What should we call him?” he asked.

“Steak,” I grinned. “He’s gonna go on my grill.”

“No he won’t!”

Super-cute eyelashes notwithstanding… but whatever. I’m calling him Buncha, as in Buncha Bull. Most likely, once he’s weaned, we’ll return him to the pasture. But before that happens, we’ll most likely be feeding him out of a bucket. Buncha is already trying to find an opening out of the pen, so I hope it won’t be much longer before he returns to the herd. But I guess if someone waves a bottle at him, he’ll be glad to go wherever it leads.

Weekend AJ blogging

Daughter Dearest’s maternity leave ran out last week, which meant she went grumbling back to work on Monday. And that meant AJ was at the manor through the day until she got home.

She doesn't mind having her @$$ in a sling!

AJ is definitely her mother’s daughter. DD liked to be held close, so does AJ. The difference is, DD's happy place was rocking. AJ is like Mason; she likes to be carried around. Wife asked me to work at home so she could deal with a couple of things without having to listen to AJ howling to be picked up. After a couple tries, we found a good position for her in my old sling, and I had both hands free for working (and taking a selfie). Of the three babies who have spent time in that sling, she’s the earliest adopter… Mason and Charlie were both about 3 months old when they got comfortable in it. She also sat in on her first two conference calls, and started crying when someone said the schedule had to slip (so she’s already qualified to be a Product Line Manager!).

She’ll sleep about half the day, and we have a little bed for her. “Safe Sleep” notwithstanding, she likes to sleep on her side more than her back (which is what Charlie preferred as well).

She's like 7 weeks old now, growing quickly and gobbling prodigious amounts of formula. When she’s hungry, everyone knows it. Charlie started sympathy-crying at one point.

She looks a lot more like Daughter Dearest now, and the eyebrow ridges and lack of hair make her look a lot like my youngest bro Solar. He replied (paraphrased), “Yup, we’re both gorgeous.”

Both of us enjoy our baby time, and Charlie likes being around her as well (although we have to make sure he doesn’t hug too hard). She’s not a boarder, she doesn’t live here, but she’s aboard.