Looking for writing-related posts? Check out my new writing blog, www.larrykollar.com!

Sunday, July 25, 2021 2 comments

Pitter-patter, part 3 (home again, home again)

The dynamic completely changed, once Charlie was in the mix. Mason went full-on micromanager, completely losing his shorts over the most trivial things.

As for Charlie, his happy place is the pool. Put floaties on him, toss him in the pool, and he’s good. The outdoor pool at the clubhouse is usually pretty cold (with 2018-2020 being exceptions), but Charlie doesn’t care about a little cold. (A lot cold is enough to get him out, but this wasn’t a lot cold.) Mason insisted on the indoor pool, but the outdoor one was tolerable even for me. So Charlie and I played around, while Mason sat in a chair and sulked because he wasn't getting his way.

After maybe an hour (I’m not keeping track of time on vacation, what’s the point?), Charlie decided he would be okay going to the indoor pool. Mason, finally getting what he wanted, joined in.

At this point, I should point out that there’s a third pool, next to the waterslide and close to the diner and country store. It was closed for much of the week, since some moron had gone tubing, didn’t shower, and introduced algae. For some reason, this pool is often warmer than the outdoor pool at the clubhouse, but it had a definite green tinge. I’m not sure why that would be a problem, since the lake is also a good place to swim (and is often warmer than the outdoor pools, and I have no idea why). Maybe the algae had some irritant qualities.

But I digress. By Friday, they had dumped enough chlorine into the pool to kill the algae, and re-opened it. Charlie was so happy to be in the pool, he wanted to hug everyone in the area… literally. He spun around with a huge grin, arms wide open, making his happy noise. Several folks thought it charming, anyway. It was noticeably warmer than the clubhouse outdoor pool, and it also has a “real” deep end (8 feet). People invited Charlie, then Mason, into their games, and I just hung out and kept an eye on the rugrats. Mason complained about the amount of chlorine in the pool, but he was wearing a diving mask so I’m not sure what his actual issue was (besides just complaining).

Mason brought a couple of R/C vehicles along for the final leg of our outing. Charlie enjoyed watching them whizz up and down the lane. Someone came up in a golf cart, and suggested a “race.” The R/C truck won (those electric motors can go from zero to top speed pretty quick).

By Saturday morning, I’d had all I could take of Mason’s attitude, his constant ordering everyone around (especially Charlie) and refusing to help. He’s been throwing up all this anti-spanking “evidence” at us, trying to dodge the consequences of his actions, so I simply told him he could have no electronics (no iPad, no Xbox, no Switch, no nothing) until his attitude got better. That probably hurt more than any spanking, anyway.

I’d loaded all the non-essentials into M.O. the B.B. Friday evening, so (with Mason’s ultra-reluctant help) we broke camp Saturday morning and headed on back to the manor. The outdoor rug stank with mildew, and needs a good cleaning, and the Starflyer needs some attention as well. I’m trying to decide whether to get the A/C fixed, or just replace it with an exhaust fan and stuff a window A/C unit in a convenient spot. Whichever way I go, I’d like to have it completely functional before I sell it and go with something else. Then again, campers are going for a premium right now… anyone want a lightweight camper with a few minor issues?

We got home, to find the wife there. They had drove up to their retreat, then the sister-in-law hosed up her foot when they went to get groceries. And when I say “hosed,” it was several times worse than either of mine. They ended up coming back. BUMMER. The wife needed a break more than I did, and I had somewhat of a break even with Mason making things as miserable as possible.

Back to work, and everything else. The boys will be in school soon, although I don’t know how long Delta will let that happen.

Thursday, July 22, 2021 No comments

Pitter-patter, part 2

Rain on a popup is a special kind of noise. What hits the bunkends is a nice pitter-patter sound, actually quite soothing. What hits the roof in the middle is anything but soothing: it’s somewhere between a pop and a snap noise. And that’s what we contended with for much of the night.

The Starflyer’s A/C isn’t working, despite my replacing the starter capacitor, so we had to make do with fans. I claimed the fan/light combo, since Mason swiped it last time. He groaned, but didn’t press the issue. Fortunately, it never got out of the low 80s (F) for highs each day… I guess the rain helped with that.

Staying dry on a wet night
With the awning and the EZup, and no wind pushing the rain around, there were dry spots to take a chair and a beer outside while Mason was zorched out (or doing late-night iPad sessions while pretending to be asleep). The EZup framework also provided a convenient place to hang swim suits and towels, to get them a little dry, anyway.

So this was our routine, the first few nights. Charlie has his therapy sessions on Monday and Tuesday, and the wife was going to have some fun with her sister on a long weekend starting Thursday, so we went home Wednesday afternoon.

The foot improved with (not enough) rest. By Thursday morning, I could walk on it almost normally for an hour or two before it started giving me grief again. Extra-strength Tylenol helped to extend the time I could use it, and propping it on a pillow at night made it less cranky in the mornings. We took a brief bike ride on Wednesday, and it was okay. Our campsite is at the bottom of the hill, so we could coast back “home.”

Thursday, Charlie had a neurological evaluation scheduled at ENEC in Decatur, so I drove us down there. In the vein of combining trips, wife had her bags packed and in the back of the van, and all we had to do was figure out where to get lunch and meet the sister-in-law. We settled on a place called Grub (Burger Bar), that served up what the wife described as “the best burger I’ve had in a long time.”

So they tossed the wife’s bags into her sister’s vehicle, Charlie told them “bye-bye,” and away they went. We also went… back to the manor, to get Charlie’s stuff and get Mason while we were at it. M.O. the B.B. chugged on back to the campsite, and we did manage to get about 40 minutes at the pool before it closed for the evening.

Sunday, July 18, 2021 No comments

Pitter-patter, part 1

Pretty similar to last time
The wife’s sister decided the two of them needed a long weekend out. Wife floated it by me, and I thought it would be a good idea for her to have a little fun time, far away from FAR Manor and the adjacent farm. Plus, maybe I could take the boys out camping or something, right?

So I called the resort to see if I could swap our week in September for something in July. Nope! All the condos were slammed. EVERYONE is (or was) trying to get out and enjoy some vacation time in that brief period before the Delta variant decided to try culling the idiots who have made such a mess of things over the last… oh, who am I kidding, my entire lifetime.

But I digress, as usual. The woman who runs the condos gave me the number for the campground (different part of the resort) and they had openings. “You can have slot 38.” As we have a new pastor at church, and I’m nominally head of SPRC (what passes for HR in a Methodist church), I decided to go in Sunday afternoon and leave Saturday morning.

On Saturday, I decided to buzz up to the resort to see what #38 looked like, because M.O. the B.B. isn’t exactly the easiest thing to maneuver around in tight quarters. I took the boys with me, so we could hit the pool as well (the pool is Charlie’s happy place). Turns out it’s the same space I had last time we came up!

Sunday afternoon involved lots of packing up. Wife bought a Thermacell gadget (it does a pretty good job at repelling skeeters and the like) at Tractor Supply a while back, but they didn’t have any extra fuel cartridges at the time. I ordered a pack from the Mighty Zon, who told me they would be in on Friday… then Saturday… then Sunday. (Can someone explain why I’m paying Prime fees when 2-day delivery is 4 days so often?) Fortunately, the shipment arrived before we were ready to go.

Lots of rain in the forecast, but we had a good dry slot as I rolled M.O. the B.B. into the road around 4:30pm. It stayed dry long enough to get the essentials set up, too. This time, I brought the EZup to put over the picnic table (instead of dragging it under the awning). With Mason’s reluctant help, we got it hoisted. I’m trying to get screens for the EZup, but their website isn’t cooperating and they weren’t really needed for this trip.

I’ve had a little more practice backing a trailer over the last two-ish years, but not enough. I did realize I needed to position the backend of the Starflyer at the edge of the driveway, this time. It only took two tries, rather than five or six, to get it into position this time.

Mason and I both brought our bikes, but I’d managed to hose my right foot… just as the left was feeling better. Mason was trying to wheelie his mountain bike back on Thursday, and I thought maybe a visual would help him. I stuck my sandal’ed feet into the toe straps, put the bike in granny gear, and gave the pedal a good push. The ol’ Raleigh lofted all the way up, and spit my right foot out of the strap. The pedal put some impressive gouges in my lower leg, and I’m still trying to figure out what I hit my heel on. The upshot is, I’m once again gimping around—two days after getting over whatever was wrong with my left foot.

Fortunately, for now, it’s just Mason and me. Charlie has therapy Monday and Tuesday. We’ll run home Wednesday night and bring both boys up on Thursday. Of course, I forgot several things, and we ended up making a Mal*Wart run (because I had no other choice) to get them.

Thursday, July 08, 2021 1 comment

Ah… the crunchy nuggets

Back in the 70s, when we hunted wild tacos with spears to get lunch, W.C. Fritos was the animated spokesperson for one of Frito-Lay’s primary products (and I’ll leave it to you to figure out which one). One of his taglines was “Greetings, my little chip-a-dees,” and another was “Ah… the crunchy nuggets.”

Fast-forwarding 45+ years…

Mason’s current obsession/YouTube rabbit hole is making replica weapons from cardboard. He has made several decent axes (and spears), and is working on more. We have plenty of unused cardboard around, and (due to disrespectful yapping) is now grounded off the iPad, so he's doing something semi-creative.

I told you that to tell you this:

While I was trying to get supper together, Mason had made a spear out of cardboard and some unused utility handle, and was hassling Rosie the Stupidog. Charlie was yelling “Stop, Mason!" over and over, and I joined the chorus when I saw what was going on. Of course, Mason kept on doing what he was doing.

Then… Charlie took matters into his own hands. He swung an arm around and smacked Mason square in the nuts.

Ah… the crunchy nuggets.

Mason staggered around, trying both not to laugh nor cry out in pain. Meanwhile, I was trying to not fall on the floor in laughter while telling Charlie that was NOT an appropriate thing to do. #parentingfail

The thing is, Charlie picks up on pretty much everything that Mason does. Mason likes to play rough with Charlie, and Charlie thinks it’s fine to do the same things to Mason (who often goes full-blown Drama Queen when it happens). So when Mason acts like he’s the substitute parent, Charlie doesn’t recognize the dynamics… and things like this can happen. Just not so spectacular (or hilarious). Most of the time.

So what will the boys come up with next?

Monday, June 21, 2021 2 comments

The next generation of information management

Some 15 years ago, I was enjoying Journler. The thing I really liked about it back then was, it could post an entry straight to Blogger. Of course, Google likes to screw around with Blogger. They broke the posting mechanism that Journler used, and now they’re concentrating on keeping it deliberately broken for Safari users. Over the years, Journler slowly sunk into the morass of apps that got left behind by advances in MacOS.  I continued to use it to capture flash fiction, scenes, and chunks of longer stories, until it became unusable. The source code for Journler has been available on Github for a long time, but I just now found out about it.

But I digress. As Journler wheezed and died, I tried a variety of paper and app systems to capture stuff I wanted to come back to later. Evernote was okay, until they crippled the free version to support only two devices (previously five). Google Keep held my interest for a long time; but I’m trying to extricate myself as much as possible from Google these days—and if I could find something better that isn’t WordPress, I’d go through the hassle of moving everything. Perhaps my longest-running attempt has been using Tines to keep notes and to-do lists organized. And yet, I’m always keeping my nose in the air, sniffing for a better way of doing things.

Recently, I started looking at journaling apps. Day One came highly recommended, and had the huge advantage of both Mac and iOS apps that talked to each other. I gave it as honest a chance as I could—downloading both the MacOS and iOS apps—and even with the daily prompt on my phone, I never really warmed up to it.

Someone suggested Logseq last week, and it sounded interesting enough to give it a try. The developers describe it as “a privacy-first, open source knowledge base,” and the videos they link to from the home page (an enthusiastic user who describes how to make the most of it) convinced me to give it a try. It can run either as a webapp, writing to your hard drive, or as a standalone desktop app. The developer says he was heavily influenced by Roam Research, Org Mode (Logseq supports Org Mode, although it defaults to Markdown), Tiddlywiki, and Workflowy.

The interface looks invitingly plain, at first. You’re presented with a journal page with today’s date on it, but otherwise blank. Start typing, and it supports Markdown (a big plus)… oh, wait. It’s also an outliner (and given my long-term relationship with Tines, that’s another big plus). Oh, type two square brackets and enter a title, like a Wiki link, and you get a new page that you can click to enter (yeah, I’ve always been fond of Wikis). Oh, type /TODO Download the desktop app on a line, and you get a to-do entry. Put hashtags on entries you think you’ll need to come back to later.

Clusters show groups of related entries
This seems like a chaotic way of doing things… until you display the graph. Then, Logseq gathers up all those scattered to-do entries, those hashtagged items, and other things, and pulls them all together. Some call this a digital garden or digital knowledge garden—me, I just call it software magic. Of course, you get out what you put in. You can create custom queries to pull things together based on how you want them. If you leave it running overnight, click the little “paw print” icon at the top left to open the new day’s journal page. Maybe this is what makes Logseq so much more approachable for me.

It took me a day or two to realize that this is the most natural approach for working with Logseq. There’s a lot of layers to it, and this brief post isn’t doing it justice. I’m using it at home with the desktop app, and at work using the webapp (because Doze complained about how not safe the desktop app was). Either approach works fine.

There’s a mobile app called Obsidian that can be set up to work with Logseq’s files, but it’s a private beta right now and I don’t need it just yet.

Now I have to figure out how to pour all the different entries in all the different paper and pixel systems I’ve accumulated over the years into Logseq. Someone wrote a script to convert Google Keep to Markdown, so that’s settled. I hope I can write a script to pull all my old Journler entries in.

Monday, June 14, 2021 2 comments

Resurrecting an old dirt bike (part 1)

Mason's latest obsession (the bi-weekly obsessions have mellowed into bi-monthly) is getting a dirt bike. We still have the one we got for The Boy; it has been (mostly) sitting under a tarp for a couple decades. Saturday, we dragged it into the driveway and got started.

1978 Yamaha DT100E… and Mason, who blinked at the wrong moment. (The seat is also flipped up.)

I'm not sure why it was put up in the first place, but we’ll give it a good shot to get running again. Despite it being 43 years old, and thrashed pretty thoroughly before The Boy got hold of it, I think we can do it. After all, I’m even older, and have been thrashed around a lot, but I’m still going. After the initial blush of enthusiasm, Mason realized it was going to require some work to get this thing going, and started grousing about getting a new one. After a few rounds of “this is what you’ve got to work with,” he came around. A co-worker graciously offered to gift him some safety gear! (I have mixed feelings about my current employer… I have many issues, but they have taken an intelligent approach to the pandemic and my co-workers totally rawk.)

So, we got started. The gas tank was filled with rust and sludge, and the carb was a mess—white powdery stuff dried up inside, and the choke and idle adjust frozen. (I would have thought I’d have known to drain the fuel out of the dang thing.) The cables were frozen. None of the above are show-stoppers—a week’s soak in Simple Green fixes most carb problems, gas tanks can be cleaned out by pouring a handful of screws in it and shaking, and I have a cable lubing tool.

We got an impressive amount of crud out of the tank. I’m not sure it’s done just yet, but we should be down to details now. De-crud’ing a gas tank is a matter of pouring in a handful of small hardware (screws, nuts, etc.) and shaking. We started with some gas in it on Saturday, got sludge out, let it dry yesterday, then put the screws back in for more shaking. Blowing compressed air in blasts out an impressive amount of stuff, the majority of it dust but some sand-sized particles as well. Once the particles are no longer an issue, I’ll probably get some liner to seal off further rust.

The throttle was frozen to the handlebar, it turned out—once I got it off, we applied a wire wheel and file to the handlebar until the rust was no longer binding the throttle sleeve. A little cable lube sprayed down the top of the clutch and brake cables got them cooperating.

The carb is at Travis's place (he works on most of the farm stuff); when we brought some parts to fix the Kubota SUV/golf cart, I told him about the project and he offered us the use of his whizbang carb cleaner—it uses sonic waves to do in a couple hours what soaking in Simple Green does in a week. We'll have the carb back tomorrow. In the meantime, we need to get new grips, an air filter, probably new tires (maybe later). Lube and adjust the chain. There’s an off-road place in the next town up, and we at least got grips today. Mason also wants brush guards, which isn’t a bad idea, but we’ll get it running first.

While I was working on the important stuff, Mason decided to hit it with some spray paint. The back fender is now silver. The bike was originally orange, and a previous owner painted it Yamaha Blue. I’ve had to repeatedly remind Mason that, if you want to do it right, you have to take the bike pretty much entirely apart to paint it. Well, I would probably have wanted to paint it first thing when I was 11. Aging sucks, but it does bring a little perspective along with it. Meanwhile, Charlie wanted to apply wrenches to it, and Mason went off the rails (as he often does when Charlie wants to get in on the action).

If we do get it running, it will be kind of interesting to see how things pan out. He has wondered out loud if it’s too big, and has talked about wanting to do wheelies and stoppies (the latter is when you grab enough front brake to loft the back tire). The answer to that is, “maybe.” He’ll have to learn to work a manual clutch, a skill that will serve him will if he inherits the Miata. Back in The Boy’s day, I put a larger rear sprocket on it to slow down the top end (I pitched it to The Boy as “it’s easier to do wheelies”)… although I think it will hit 50MPH with a little running room as is.

I can see him tailing the Kubota, while we work on the fence, and maybe he'll ride the fence line and let us know about issues (before the cows get loose again). We can always hope he’ll use his power(sports) for good.

Tuesday, May 11, 2021 2 comments

Busy weekend

I had a busy weekend, but a good chunk of it was the busy stuff I wanted to handle (for a change).

One of the things at FAR Manor that had languished for a long time was the deck out back. The Boy had put up the framework for the railings, and was planning to finish it out, but… things happened. “They” say there are three ways to get things done:
  1. Do it yourself.
  2. Pay someone else to do it.
  3. Tell your kids to NOT do it.
Mason, if told to not do something that smacks of work, will have a rare moment of obedience. Daughter Dearest isn’t exactly the construction type, Charlie is willing but not able just yet, so Number Three didn’t apply. I really wasn’t keen on paying someone to do something I could do in an afternoon or two, so cross off Number Two.

I made a shopping list, punched it into the Home Despot app, and told them I’d come pick it up. When the “It’s ready!” text come in, I loaded Mason and Charlie into M.O. the B.B. and we clattered off to the retail district. As I was tying down the load, I realized something important: instead of 10 2x2s and one 1x4, they gave me eleven 1x4s! I went back inside and let them know what happened, and they sent someone out with the right lumber.

One of the things that inspired me to get this done, was the wife finding a palm nailer on the deck. I had no clue what it was, and looked up the brand and model number online. It’s an air-driven nail gun, but it drives regular nails and bangs them down like someone wielding a hammer at 4x speed. I had no clue such a thing existed, before it appeared at FAR Manor. Cut a picket to size, get it into the right place, line the nail up on the top rail, and let fly with the nailer. Then toenail the bottom into place.

I made quick work of the pickets, but there are large gaps—I have a slide and small climbing wall coming off the deck. My clever thought was to put doors, or gates, across those openings, so they can be used or closed off when AJ is out there.

Unfortunately, there aren’t any commercial gates that size, and the one I need at the top of the stairs would cost a lot more than what I would need to build one. So I started envisioning what a gate might look like—it would need crossbars, so I could attach hinges, but be light enough to not sag under its own weight. After a little finagling, this is what I came up with:

This particular gate closes off the slide. A few feet to its left, I need to set up double gates for the climbing wall. Oncoming rain and darkness worked against me, and this was the only gate I was able to finish and mount before I was through. Of course, I’d forgotten to put latches in my order, so that’s something I’ll have to tackle next weekend.

Sunday, after church, we decided to run out to get lunch. Culver’s is intelligent, and hasn’t opened their inside dining area yet, and we’re fine with that. We went through the drive-thru, got what we wanted, then decamped to a nearby bank parking lot where we parked in the shade and rolled down windows. That’s how we’ve rolled during the pandemic, so far, and it’s gonna be soooooo weird to eat inside with other people around.

But I digress. The wife wanted to get some fencing fixed, but I wanted to get some cheese started. Fortunately, after heating the milk and adding rennet, it has to sit for a while. So I put the lid on the pot, and said “Let’s get that fencing dealt with.”

Returning from the fencing work, I had a look at the pot. The recipe said the cheese would set in 90 minutes, but it hadn’t even started. I decided to leave it, to let the rennet work a little longer, and hoped for the best. My rennet has been around for a long time, and maybe it’s starting to wheeze. The original recipe used liquid rennet, and I’m going to get some for my next attempt.

Quejio Fresco
I’ve made soft cheese before, especially using homogenized and pasteurized milk, and it’s far easier to get good results using raw milk. But, you work with what you can get. Anyway, after four or five hours, the milk finally set up. I cut up the curds, spooned them into the mold, and let it start draining. I had to separate it into two batches at first, because (even starting with only two quarts of milk) it wouldn’t all fit into the mold. After about half an hour, enough whey had drained out that I could consolidate the two batches.

I used a recipe for quejio fresco this time. I’ve made Neufchatel before, and I think I like this one better. One idea I hit upon, was to put the cheese mold on a splatter screen (a screen you usually put over a frying pan, to keep bacon from exacting revenge upon its cook) over a large bowl, as a draining system. This worked very well, because you don’t have to constantly pour the whey out (and if you want to use the whey for ricotta or some other recipe, it’s an easy catch). You can see the splatter screen’s pattern on top of the cheese.

After unwrapping the cheesecloth, and shrugging at the lopsided appearance, I took it out to show the wife. AJ was in her lap, and immediately gave me the “eat” sign. AJ sort of grazes her way through the day when she’s at FAR Manor, usually eating something. Anyway, I cut a sliver off one side, and brought it out. AJ scarfed it right down.

Later in the evening, I spread some on a rosemary cracker (it’s soft and spreadable) and gave it to the wife. After requesting seconds, she said, “This is really good. Good thing I’m going to be out and about tomorrow.” So both the youngest and oldest girlies in the manor approved of my efforts! In the Azores, where this cheese originated, they often have it for breakfast on crusty bread. I’m going to put some on toast in the morning.

I’m slowly getting back into the mix. I should tackle taxes next. :P

Monday, May 10, 2021 2 comments

A second (frosty) bullet, dodged

Gardening in Georgia is always a crapshoot. One can usually deploy plants that don’t handle frost well once mid-April rolls around… but not always.

As I mentioned earlier, I bought new tomato plants after a late frost whacked the first set. But winter wasn’t done dicking around with us—another frost was on the way. I’d put the first set of plants in the ground, and they had started to revive. Since the bottom set of shoots (that had been covered in mulch) still looked healthy after the frostbite, I decided to cover the in-ground plants in mulch and put plastic over them.

The containers, I hoisted onto a pickup truck and put them in the garage for the night. Why take chances if some of your garden is semi-mobile?

This worked pretty well, in the end. The mulch-covered plants endured the freeze without (further) damage, and started growing better soon after. The container plants had no problem spending a night in the garage, either.

All the plants, even the in-ground ones, are sporting blooms now. A couple of the container plants have small greenies on them. I’m looking forward to the first harvest!

Tuesday, April 20, 2021 No comments

Action shot

A few weeks ago, one of the other parents on Mason’s soccer team sent some pictures they took during the game to the group text. I cropped some extraneous stuff to get this great shot of Mason booting one:

Here it comes!

His team is now 3-1 on the season, after the two-week Spring Break hiatus. We went to Blue Ridge (about an hour’s drive) on Saturday, and they did pretty well. This is the first game that they dominated when the other team had girls (I don’t know why, except that I’d guess that any girls in the boys’ league are solid team players, and these girls were no exception). As goalie, Mason let a ball get by him in the first half (one that he should have handled), but his team was up 5-1 at the half. Coaches like to put Mason in goal in the first half, and striker in the second half (he’s fast, and not worn out in the first half), and he scored three more to make up for it (they won, 8-1). It’s amazing, how much better they’re playing this season. For the players that left, the replacements brought a chemistry that makes them all a better team. They’re passing better, defending better, working together better. We’re seeing improvements even from game to game.

One of the more hilarious moments of last weekend’s game: both teams had kids named Avery and Cash. “What are the odds?” the opposing coaches joked. Our own Cash joined the team just last week, had one practice, then played his first soccer game on Saturday. He’s a natural in the backfield as a defender. His primary sport is competitive swimming, so stamina isn’t going to be an issue! (We also have a Mason, Grayson, and Kason. All we need to round out the team is a Jason.)

The only low point was when Charlie (not my Charlie) got an elbow to the head in the first half. He had banged his head the day before, so this was the first time I’ve personally seen the league’s concussion protocols invoked. He sat out the rest of the game, with an ice pack on his head—a pity, because he was doing pretty well up to that point. He was better today at practice, but said he didn’t feel 100%.

The head coach is giving the team a “clinic” on Friday evenings, for the guys who want to try out for the middle school soccer team. Dizzle told me the team is “not very good,” but I think Mason and several of his teammates would definitely be assets. They might surprise the rest of the league this winter, the way the Sounders are surprising the rec league this spring.

A couple of team quirks: first, they sing “Happy Birthday” to any teammate who arrives to practice late. Today, while practicing penalty kicks, a few of them started singing the national anthem. The head coach and I decided that it might be worth trying during a real game, if the opposing team gets a penalty kick against us. Worst that could happen, the ref tells us to knock it off.

So yeah, we’re having some fun this season. I think we have a rematch against the team that beat us, and we might even surprise them.

Sunday, April 11, 2021 1 comment

What I did on my Spring Break staycation

Mason was out of school, this last week, and I’ve decided to try taking days off when he’s off—just in case we get the chance to do something together. But I had a week, and there was no rain forecast for the first half of it, so I decided to try getting as much stuff done outdoors as possible. I had seriously considered taking the Starflyer down to the pond for the first half of the week, but realized it would clash hard with all the stuff I wanted to deal with.

First, this year I wanted to have a container garden (mostly). The farm has plenty of plastic tubs laying around, the containers for minerals given to the moofers. There are several places in the back yard where dirt piled up against trees, and much of it is loamy stuff with some clay deposits. I dug out enough to fill four tubs, drilled drain holes in the tubs, and stuck container-friendly tomato plants in them. A late frost whacked them pretty hard (despite our covering them with plastic sheets and leaving buckets of water underneath as heat sources), so I got replacements and stuck the frostbit ones in the ground… along with two jalapeño plants. The bottom shoots, that were covered in mulch, survived the frost. Maybe if this happens again, I’ll just pile mulch over the plants as well. Or, I’ll just wait for that first April frost next year.

Buried treasure
Next, I tackled The Boy’s old car (a black Integra, which inspired the name for the Blackuras, a street racing gang that draws Blink’s attention). The left rear brake caliper was stuck, and the car had sat in its spot for several months. When I put it there, the stuck tire picked up a piece of gravel, and you can still see the arcing “chalk” mark it left behind. So I bled some brake fluid out of the caliper, and tried prying it apart with heavy-duty screwdrivers and a prybar, without luck. What worked was smacking the moving part of the caliper with a hammer until it loosened up. After cleaning it out, and finding some interesting stuff (including a portable charger) I moved it to the new equipment yard and made a mental note to replace that caliper. Like my old Civic, the floor of the trunk is rusted through, so some Dremel and pop-rivet work is in my future. I hope I can get Mason interested in fixing it up a bit, then when he’s old enough to drive I’ll give him the car. (Although he’ll probably want my Miata instead.)

Good as new!
With the car out of the way, there was plenty of room to roll out the worn out washer and dryer that we replaced earlier this year. But first, the landscaping trailer the wife had bought some years back needed some serious electrical work. The plug was gone completely, both taillights were smashed, and so were two of the four marker lights. Fortunately, Tractor Supply had me covered. A $25 kit included taillights, two marker lights, a license plate mount, and the entire wiring harness—in other words, everything I needed for the electrical part. The marker lights were stud-mount, which meant I had to drill a 1/4" hole in between the old mounting holes. Since I live in the South, I learned that WD-40 works quite well as a cutting oil. I spent much of Monday afternoon hacking on the trailer. Once I finished the road (driver’s) side, the curb (passenger) side went pretty quickly. I plugged it into the farm truck, and realized the reason I wasn’t getting taillights was because the truck had a broken wire. The kit included some splices, and I didn’t need two of them, so I used one to fix that.

Tuesday, we loaded the washer and dryer onto the trailer, plus the furnace we replaced last year and a lawn mower with a bent crankshaft (I hit a small stump… it’s FAR Manor, why are you surprised?), plus the aluminum cans we’d let pile up for years, and took it all to the scrapyard. Mason and Dizzle rode along, and had great fun launching the lawn mower off the edge of the concrete. The only snag we hit was when they went to cut the check—it turns out that The Boy (who shared my first name, although he mostly went by his first middle name) had brought loads to the scrapyard. When they said, “Lawrence?” I assumed the wife had used my name for whatever reason. But she had been there as well, so I had them re-cut the check in her name. It all goes into the same accounts, after all. So we returned to the Manor, $41 richer (and more importantly, less crap laying around). They promised to set me up with my own account, next time.

But the trailer was not quite finished. It has a mesh ramp, that doubles as a parachute when towing it. When it was new, it had spring-loaded pins that would hold the ramp up for traveling, but they broke. Bobcat just flopped the ramp onto the trailer when empty, and used rope to hold it up when loaded. I used ratchet straps, but I really wanted it to be properly functional. Back to Tractor Supply… I found some long 1/2" pins that would do the job. To get everything back into alignment, I used a four-pound maul (the flat end) to bang things into place. Yes, percussive maintenance is a valid way of fixing certain issues, and quite satisfying. It was even more satisfying to have two such opportunities in one week. “This is how we fix problems at FAR Manor!” (Or as one of my college friends was fond of saying, “Don’t force it, get a bigger hammer.”)

By Wednesday, I was pretty stiff. Monday had included soccer practice, even though Mason’s team had two weekends off, and the head coach (I'm the asst. coach this season) knows exactly what motivates his players: a scrimmage. Last season, we did a series of scrimmages against the parents, and the parents pwn3d them because they weren’t passing. Something must have clicked between last season and this one, because they’re mostly holding their own now. They’re passing better, and are 1-1 vs. the parents and 2-1 vs. the real teams. (They were like 1-7-1 last season, and never beat the parents, so this is already a huge improvement.) To toot my own horn, I took the assistant-coach position so I could advocate (guilt-free) for more passing drills… I’ve observed that, at least at this level, the team with the better passing game wins at least 85% of the time. The head coach came up with some drills that emphasize passing, and it has helped a lot.

Mason’s team has practice on Mondays and Thursdays, and we were planning a parent-team scrimmage. I was slightly less stiff, but there was still a lingering muscle pull in my right leg (just under my butt). Monday, I pulled the left side, but slightly less. I joked about needing a butt replacement, but mostly held up my end. Of the three who played goalie on our side, I was the only one who didn’t let a ball get past (OK, that was mostly luck). Now the rain was supposed to come in by Thursday, but retreated to Friday except for an occasional sprinkle.

But when Friday came around, the rain retreated again. Now I have to admit, Charlie thought this was wonderful. It meant he could spend more time outside, and we did some “throw disc” long after I figured it would be far too wet. I didn't do much, but that helped a lot with the stiffness issues.

Yesterday morning, our friends came by with more chicken. Last time, we got six. We gave two to Daughter Dearest and Sizzle, two more to the preacher (who returned one smoked, yum), and the others went into the freezer. This time, they brought about two dozen. Since this was a freebie, and there was no way we could deal with that much, the wife started making phone calls while we broke out the vacuum sealer. She hit upon a great idea, to stuff a couple of them in the Instant Pot and then de-bone them. I found some suggestions online, and we bagged up the rest for both us and several others. We had chicken casserole for supper, and at least two more chicken-based meals bagged and frozen. Meanwhile, I have to figure out where I put my beer-can chicken stand. I used it once, and it turned out very well.

The rain finally arrived, and pretty much went all day. I had planned for more rain days, and a few improvements to the homemade worker’s paradise, but there was one I knew I could tackle: I wanted a shelf above the coffee station, to keep things that didn't need to be on the table all the time. I’d found some shelf brackets a few weeks prior, and a wrecked bookshelf provided the actual shelving. A nail head poking out of the paint told me where one stud was, and I measured to find the others. I had to run across to the detached garage, during (of course) one of the heavier rain periods, to grab a pack of wood screws. I had to reposition brackets a couple of times—I think the studs weren’t placed evenly—but eventually all the screws found something to bite. I only had to take off and flip one bracket, that I’d put on the wrong way.

A little yard work today wrapped things up. I went after the smaller (diameter) stumps that dot the back yard; I focused on those because they’re not so easy to see. Some I sawed out, some we dug up, several got the loppers. There are a couple dozen larger stumps, but they’re easy to spot and shouldn’t give a lawn mower a fatal surprise. If next weekend cooperates, I’ll rent a stump grinder and have at 'em.

So, back to work tomorrow. I’ll probably spend most of Monday weeding emails.

Sunday, March 21, 2021 No comments

Take our best shots

Fire away!

Charlie and I have been chucking our golf discs around the house when weather permits (and it permitted much of the last couple weeks). Of course, Charlie is a fiend for going outside, and he realizes I like doing this, so he tries to entice me with “throw disc?” Not when I’m working, unfortunately, although I should probably take a short health break in the afternoons. The problem with taking Charlie outside for a short break, though, is that he doesn’t want to have a short time outside. If I don’t have a call right after lunch, though, we might do a round.

He’s improved a LOT in the last couple of weeks. It used to be, he could barely get five feet out of a throw. Watch him now:



Meanwhile, I started taking a serious poke at getting the wife and I vaccinated, so we can Say No to the Ro for good. The Georgia Dept. of Public Health has a page that helps. My first attempt was fruitless, but on the second try (last Thursday), I got an appointment for this Thursday! The only drawback was, it's in Marietta. Oh well, people have been driving to Alabama to get vaccinated, as they had some looser requirements than Georgia for certain segments (teachers and clergy) until recently. Mississippi and the Cherokee Nation are both offering vaccines to all comers as well, which leads me to wonder if vaccine tourism is going to be a thing for a while.

I put both the wife and myself in pre-registration, thinking we might end up at the mass vaccination site in Clarksville. The wife pointed out that we should stagger our appointments, in case we both had to spend a day in bed with two kids running loose, and told me to get mine first. But she never got an email, so I ran her info through again. I immediately got her an appointment for tomorrow afternoon, in the next county over! So although I got my appointment first, she’ll get her shot first. I took Thursday and Friday off work, one day for the drive down (wow… I’ll be going somewhere!) and the next in case I need to rest up for the day.

 
We spent much of yesterday digging through the stuff stacked in the garage. Wife was getting inconvenienced at the narrow clearance between the stuff and her van. I found many things she was missing, filled a large garbage bag with trash, and stumbled across a cooler full of Caffeine Free Coke Zero and Diet Mountain Dew. It must have been The Boy’s, which means it was sitting there for well over a year. Several of the cans had lost pressure, and the cooler had a couple inches of yuck-colored fluid in it. I kept the good cans and put them in the fridge. The Coke Zeros are Mason’s, the others are mine.

With the van backed out, Mason decided to take up his dad’s skateboards. I showed him a video of how to do an ollie, and he was “that’s gotta be CGI or something.” I assured him no, I’d seen his dad do it, and explained the physics of it as best as I could. After an hour or so, Mason was able to get at least a little air!



So everyone is taking their best shots at FAR Manor. And I tell you, I will never be so happy to be stuck with a needle as I will be this Thursday.

Friday, March 05, 2021 No comments

Up too soon

Image source: openclipart.org
As Daughter Dearest has to be at school at way-too-early a.m., she drops AJ off at our place through the week. Wife gets the baby, she squawks on and off—sometimes waking me up, sometimes I integrate the noise into my morning dreams.

So the wife arbitrarily decided that I would get AJ on Friday not-quite-mornings. I didn't agree to that, or anything else, but whatever. Not that I would have said no if I’d been consulted about AJ in the morning, but nobody bothered to ask.

Thus, her 6 a.m. alarm went off. Some mornings, she’s in the living room recliner (having been put to sleep by the Hallmark Channel). Some mornings, she fumbles for the phone in our bed. And… on occasion, the phone goes off in the bathroom, while she’s in the living room, and I have to silence the mofo and give it to her.

But this morning, she was in bed, with her phone within easy reach. After a few minutes, she said, “AJ will be here any minute.”

Dropping plenty of F-bombs, I threw on a pair of long johns and a T-shirt, and staggered into the living room as I saw headlights drift by the window. I flipped on lights and got to the door in time for DD to bring Granddaughter Dearest in.

After Mama, AJ’s favorite person is Grandmom (but not by much). Granddad is down in the long tail, especially at 6-effing a.m. So when DD handed her over to Granddad, she started howling. DD’s hasty exit did nothing to settle the situation… fortunately, I did have a bottle handy. After some continued howling, she decided to chow down on the milk.

But it was too late. Rosie, aka Doofus, aka Stupidog, decided something was WRONG and hustled down the hall to jump on the wife. Charlie, who had staggered into our room some time during the night (which is unfortunately typical), was already up and around (“Hi, AJ! Hiiiiiiii!”). So wife got to sleep in for maybe 5 or 10 minutes. AJ immediately started howling again when Grandmom didn’t get her right away, but she was busy getting breakfast ready for both AJ and Charlie.

Wife turned on my coffee maker, but I opted to flop back into bed once she had AJ. I could always reheat my joe in the microwave, after all, and that’s what I did. Then I made espresso, and that got me through the rest of the morning.

To be honest, I hope that’s the last 6 a.m. wakeup call for me. I’ve never been a morning person.

Wednesday, March 03, 2021 No comments

A glut of meat

As I’ve said, there were a few upsides to the pandemic (for us, anyway). Avoiding restaurants, for one thing, meant we made a dent in our overloaded pantry and freezers. So there was space… fortunately.

As Mik Dragonrider observed, cattle are born knowing all profanity, and gladly teach it to anyone around them. Like people, adolescent cattle like to test boundaries. In their case, the boundaries are usually physical (i.e. fences). Younger calves can (and often do) slip between the barbed wire strands—the grass is always greener on the other side, after all. Larger calves, and full-grown cows with a taste for adventure, have to probe for loose (or broken) wires. The SOBs are always finding—or making—holes in the fences.

But one particular bull calf took a different approach. Instead of finding loose spots, he just jumped over the fence. Whenever he pleased.

Devolved T-rex
A digression: the parents of the Evil Twins have a friend who works in a chicken processing plant (a magical place where evil chickens become good chickens). Over the weekend, they brought us a box of whole (processed) chicken—seven in total, around 30 pounds of bone-in poultry. Fortunately, we have a vacuum sealer, and bagged the bounty. Three of them went to Daughter Dearest. I offered one to the preacher, and he said “Bring two, I'll smoke them and give you one back.” Works for me!

Back to the calf. We have a holding pen, where cows going to market get diverted, and somehow the wife got Jumpy in there. With grain and alfalfa pellets, he decided he preferred it to jumping out to the pasture. The family who re-roofed the manor, and generally hangs out with us, went in halfies with us on the calf. It helped that they have a trailer and a 4x4 pickup (it has been seriously soupy in the pasture, with all the rain this winter). The wife wielded a stick, and Jumpy found himself in a trailer. He tried to jump out a couple of times, but only banged his head against the lattice over the trailer.

While we were waiting for the processors to do their thing with Jumpy, the other family gave us a few packs of venison. Most of it is ground, but there are some tenderloin “medallions” in there. I refer to the latter as “douche steak,” because the wife uses a vinegar/water marinade (then rolled in bread crumbs and pan-fried… it’s really good stuff).

We have steak!
Yesterday, while Charlie was at his therapy session, the processor let the wife know Jumpy was ready to come home. We had anticipated this, and I chucked all of our coolers into the back of Moby Yo (the great white minivan) before she left. Of course, the processor had already boxed up the packages, so the coolers weren’t necessary, but better to have and not need than to need and not have, right?

We ended up with two boxes. One was all the really good stuff: brisket, ribeye, strip, filet, flank steak, one roast, and a few other cuts. The second box was ground chuck, still good stuff, partitioned into one-pound packs (perfect for us).

So, Jumpy’s last jump landed himself in our freezer. I did half-and-half venison and ground chuck yesterday evening for tacos, and the wife kept raving about how good it was (she was really hungry, but still). There are leftovers for my lunch, which is even better.

With all the beef and chicken in the freezer, I expect the wife will be craving pork before too long…


Friday, February 26, 2021 1 comment

I want to ride my Franken-trike

With near-incessant rain earlier this month, we brought one of Charlie’s tricycles inside for him to ride when it’s too soupy to ride outside. He has a Radio Flyer “Fold and Go” (it folds up quite nicely for transport) and one I got off the Zon (it has a push/steering bar for a parent). Encouragement and getting bigger means he doesn’t need to be pushed quite so much, and he’s quite happy to hop off and push his trike around just for grins. The Fold and Go is the inside trike, when one is needed.

Lately, the wife has been requiring me to go with her to take hay to the cows. This usually involves a huge roll of hay, and it’s more convenient (for her) with someone else to cut the twine holding it together before she rolls it out in the pasture. Charlie comes to watch. I really ought to get video of her hay-dispersal technique; it takes quite a bit of coordination. The tractor has an end-loader attachment, except there's a five-foot spike in place of a scoop bucket. She spears the hay on it, takes it out to where she wants it in the pasture, and drops it off. Then she uses the spike like a huge fingertip to flick the roll down whatever slope is convenient (this is Georgia, flat ground is a rarity unless it’s been leveled).

But I digress. Earlier this week, after returning from a hay-dispersing session, Charlie jumped on his trike and began riding. “Uh,” he said, then spun the pedals. The trike didn’t move.

I pulled the front wheel off the fork, and had a look…

It’s broke, Jim.

“I’ve been expecting that,” the wife opined. “He keeps running it into things.”

Charlie was going “ride?” and making his sign for cycling, so I thought things over. Back in Mason’s day (or maybe earlier), we picked up a Mongoose trike at a yard sale. It was fine until one of the rear wheels broke, then it got put aside. I used the good rear wheel when Charlie parked his Zon trike too close to the edge of the driveway and Big V’s widower caught a wheel. So my first thought was maybe I can pull the front wheel off the Mongoose and Frankenstein a working trike. No such luck—the mounts are completely different. I briefly considered an entire fork swap, but that would require both the Radio Flyer and the Mongoose to have the exact same fork tube diameter. They’re close, but it would be a lot of work to verify…

But hey! Why not pull the rear wheels off the Radio Flyer and put them on the Mongoose?

Sparks fly!
Like pretty much anything else at FAR Manor, easier said than done. Fortunately, both of them have a 3/8" axle, so swapping wheels was no problem. Push nuts are common on walking-speed rolling things, and they are one of the rare exceptions of being easier to put on than take off. I tried prying it off with a screwdriver, yanking with pliers… and finally decided to order some new ones and get out the Dremel.

The Dremel already had a metal cutting wheel on it from the last job (and I can’t for the life of me remember what that was), so I let 'er rip. I was very careful, and put only a small notch in the plastic. It wasn’t necessary to cut all the way through the push nut; just grooving it was enough to weaken it to where I could pull it off with pliers. The axle was in a frame tube, so it slid out and I got the second wheel off for the price of one.


With the wheels off, I put the big wire wheel on a drill and skimmed the surface rust off the Mongoose’s axles:


This, of course, took longer to get the drill and mount the wire wheel than to do the actual work. I sprayed some lube on the axles, more to prevent re-rusting than reduce rolling resistance.

With the axles ready to go, it was time for a test fit. OOPS, the inside of the wheels rubbed against the step. Fortunately, it required only a pair of thick washers to add the needed space:

Just a little extra space was all we needed.

The second test fit left me satisfied, and I waited for a box of push nuts I ordered off the Zon to arrive. Then, I had to re-assemble everything after I turned my back and Charlie tried to ride it. Fortunately, I managed to find the outside washers (one outside the garage and one in the gravel driveway), and Dizzle (Sizzle’s #2 son) found the missing bearing.

The new push nuts didn’t want to cooperate—it was afterwards that I remembered a reviewer saying to use a socket to even out the force—so I found the old Mongoose push nuts and popped them on instead.

Ready to ride?


Yup! I moved the seat as far back as it would go for Charlie, but a little time with a drill press might let me move it back a little farther. The Mongoose’s pedals have a longer… throw? moment arm? than his other trikes, so he seems to be able to get a little more power out of it, letting him get up the driveway a little better.

I wonder how long it will be until he realizes he can stand on that back step and push with one foot…

Sunday, February 14, 2021 1 comment

Got root?

Life on a farm—or FAR Manor—is a constant hack-fest. Sometimes, heavy equipment is required (and at other times, the heavy equipment is the subject).

A few weeks ago, I talked about the yard expansion (and roof work). The driveway loop/guest parking/equipment yard was most of what the wife wanted… except for one little thing. There had been a gigantic white pine, almost straight out from the front door. The same lightning strike that fried our light switches (and DSL box), 3.5 years ago, also nailed that tree. It was still green, but dying from the top down. So, while Bobcat was working general mayhem on the scrub and other flora, I finally relented and had him drop the big pine.

All well and good, and I rented a stump grinder to level it out, but Bobcat “forgot” to deal with the roots. Several of them were as big around as a decent-sized tree in their own right, and made humps in the driving area. This did not please the wife at all, and she complained about it off and on pretty much all the time. Finally, I realized that she actually wanted a solution, not just a gripe-fest.

“Maybe we can dig up the roots and pull them out with a tractor,” I suggested at last. She dismissed the idea at first (it was my idea, after all), but then warmed up to it. And so, a semi-dry evening found me outside with a shovel and a crowbar, loosening dirt around the offending roots and tossing it out of the way, until we had room to slip a chain underneath.

A tractor pulls up a large tree root.
Up-rooting
It has been raining a lot in the last week, and more was on the way (and more yet is to come). But the wife went and got a tractor, and I dragged the chain out of the big garage. We started with a smaller, “practice” root, only as big around as my upper arm. I used a chainsaw to disconnect it from the stump, then wrapped the chain around it and hooked it to the tractor. Hoist… and up it came!

Now for the main event… um, nope. I couldn’t get the chain to stay around the bigger root, because there was a small branch diving deeper into the ground right where I’d cut it loose. I dug around it, then chainsaw’ed the branch away (but left about an inch to help keep the chain in place).

As the root started coming up, the rain started coming down. We got the thing out of the ground, I slid the chain toward the middle, and then raked a mat of dirt and gravel off it. Finally, she carried it out of the way.

The rain got close to being a downpour, and the wife put the tractor in high gear to get it back to its dry garage as I bolted inside and hit my head with a hair dryer.

Root has been got
So we got root, at least part of it. There's another one, almost this big, still attached to the stump. If we get a few dry hours, I’ll get that one dug out and cut away. At that point, we might be able to pull up the rest the stump with the tractor.

Too bad it’s pine… it would have been great firewood.

Monday, February 08, 2021 1 comment

Mason Minecraft Monday

We don’t do these as often as we like, but on occasion Mason will show me something that reminds me to tell him to send screenshots.

He’s at that age where he picks up a new obsession about twice a week, on average. The current one is a (for him) nostalgia trip: he and The Boy used to play Star Wars: Battlefront when Mason spent weekends at his place. We got him his own copy of the game, and he has zeroed in on the vehicles. In some ways, he and Charlie have a lot in common.

Lately, he has started building various Star Wars gadgetry in Minecraft, and he sent me a few screenshots.

X-wing fighters

Y-wing ships

A-wings

AT-AT (aka Imperial Walker)

He said to tell you, “It's my first one, and it's small, and I’m going to make a bigger one.” I think he means all of the above.

I need to hit Publish, because there’s only a few minutes left in Monday. But I hope to see more intersection between Minecraft and his Obsession of the (Half)-Week.


Monday, February 01, 2021 No comments

Adventures of a #techcomm geek: Go API

Image source: openclipart.org
A couple weeks ago, I got an email from a product manager:

Can you convert these API documents to our format?

Attached were three Weird documents. I let my manager know about the request; he told me to make sure we had rights (the documents were from an OEM, we’re marketing a re-badged version of their product), and to loop in the other writer on this product.

I looped in the other writer, who used to sit right across from me when we had those quaint “office” and “commute” things. While both of us thought it might be best to do it the “right” way—that is, convert the docs to DITA and publish them through our CCMS—we both figured replacing logos and changing names would be good enough.

We both expected the other to pick it up, I suppose, and I was doing other things. The upshot was, I forgot to ping him about it. So Monday came around, and nothing had happened. I groaned at the prospect of using Weird for something more than a two-page HOWTO document, then thought about the scripts I wrote for pulling in documentation through Markdown. “If it becomes too much of a hairball to clean up,” I told myself, “I can always replace the logos and change the product names.”

As it turns out, Markdown is quite adequate for API documentation. There was some cleanup involved, but not as much as I had feared. Global search and replace took care of a lot of it. Most of the manual cleanup was the same kind of thing anyone does when bringing someone else’s documentation into their system—improving topic titles, adding boilerplate… you know the drill. It took about a day to knock the three documents (total of 600 pages, give or take) into shape, and another day to tweak things.

I went ahead and fed the bookmaps to our transform. It was only after I got a decent-looking PDF that I realized: all the topics were still in Markdown. In retrospect, that wasn’t too surprising: the toolkit converts those topics to DITA (temporarily) before processing them. Markdown is a lot easier to deal with when you’re doing cleanup stuff anyway, and I finished that before doing the uplift.

So by Wednesday evening, I was ready to upload the converted documents into the CCMS. The upload tool is more finicky than Morris the cat, and it uncovered a couple more cleanup issues. I resolved those Thursday morning, and we now have clean DITA in the system.

And yay, I didn’t have to touch Weird!

By the way, the conversion scripts are on Github. Just in case you need to do something like this.

Thursday, January 28, 2021 2 comments

Go yard (and raise the roof)

One of the reasons I didn’t want to buy the house that became FAR Manor, I thought the roof was pretty sketchy-looking. It was obviously uneven above The Boy’s room. But somehow, it held up all this time and never sprang a leak.

It's metal, man.
But the pandemic let me dump all the money we had been spending on restaurants into savings, along with what I’d been throwing in to cover insurance and property taxes (or any incidental one-time expenses), and it added up. Back in spring, an older guy came by and asked to lease the garden area where the mother-in-law once held court. Wife said “don’t pay us, just give us some of the produce.” That worked out well, but his son runs a roofing company. He came by in December, and gave us an estimate. I had enough in savings to cover it, so I gave it the go-ahead. Last week, it finally happened. I’m not sure how much the wife will like it when it starts raining acorns in the fall, but (as usual) we’ll burn that bridge after we cross it. But hey, the color matches the gazebo!

Not shown: the new chimney cap. The old one lost its covering on one of the many windstorms a while back. I took it down, and riveted new sheet metal on it, but another windstorm did for the repair as well. The new one looks a lot more substantial.

But even before that… I’ve mentioned Bobcat. He came around to help the wife with farm work, then brought his namesake and (under the wife’s direction) began clearing trees around the front of the place, to make a driveway loop. FAR Manor’s driveway has always been tricky to negotiate, especially with larger vehicles, and even more so with the Starflyer parked in front of the detached garage. He ended up clearing all the trees and brush from around front. Delivery vans have a much easier time getting in and out of here now—especially since it’s an equipment yard as much as a driveway loop.

Front (pano view)
Then he said, “Hey, while I’m here, you want a larger back yard?” In for a round, in for an octagon, as Bailar the Blue might say. Bobcat made it spacious enough that I decided to order another disc golf goal (and I probably could have made room for a fourth). He also planted grass, but didn’t get the sticks up and didn’t smooth out the ground before sowing. It’ll be a bumpy ride on the mower for a while.

Rear (pano view)
Charlie enjoys tramping around the expanded yard, and especially likes dragging a wagon or riding (or pushing) a tricycle around the driveway loop.

Plenty more parking… too bad we’re not having many visitors these days.

Tuesday, January 12, 2021 3 comments

Charlie Five, and a brief uh-oh…

Charlie wearing a paper crown, made in church last week
King for a day
Charlie turned 5 late last week, but of course we waited until Saturday to celebrate. After all, his bio-brother Skylar has his birthday pretty close to Charlie’s, and Sizzle has one as well. So the party was extended, but Charlie wore the crown! (After all, he made it in church the week before, as part of the Epiphany lesson.)

There was cake for everyone, and presents for the birthday folks. Sizzle brought some chow, and the wife made some stuff, and we all ate, drank, and were merry.

But… (cue the “dun-dun-dunnnn” music here)

Sunday morning, Sizzle sent the preacher and me a text: Daughter Dearest is running a fever we will be staying home today and keep everyone updated no other symptoms. Well, if DD got the ro, then we had been exposed as well—especially me, because I hugged her twice and she took a nap on my side of the bed.

They all went and got tested in the afternoon, and we changed clothes, took showers, and planned to hunker down. During the early days of the pandemic, I bought two huge canisters of powdered Gatorade, and sent them the unopened one. I caught a pretty good case of the flu back around 2000 or 2001, and staying hydrated let me bounce back pretty quick once the fever got tired of hanging around. The non-nutty sister in law was in the hospital with her own case of the ro, which likely happened (the hospital part) because she got dehydrated, and I wanted to make sure DD had every possible advantage. I made plans to do our grocery run as curbside pickup this week.

[Aside: Big V probably would have been a casualty, had she not checked out a couple years ago. She never took care of herself, and I suspect she would have been a ratlicker. The Boy could have gone either way, and probably would have. Mason definitely has mask fatigue, but he’ll wear it if we remember to bring it.]

Today brought a little better news. DD called me this evening and said her test was negative (woohoo!), and the sister-in-law came home from the hospital. Sister in law is debilitated, as is usually the case. I’ve heard that each day in the hospital adds a month to full recovery time. She was fairly healthy to begin with, so maybe she’ll bounce back by summer.

Meanwhile, since we’re still saying no to the ro at FAR Manor, I made a minor grocery run this evening. But given how the B117 strain (aka the “UK virus”1) is proliferating, I’ve once again broken out the Clorox wipes to clean off everything that comes into the house.


1If the wingnuts want to call the original the “China virus,” then it should be acceptable to call this latest strain the “UK virus.” And we should also call H1N1 the “American virus,” since it originated in Kansas.

Sunday, January 03, 2021 2 comments

Steak and RSS


Steak is better than sizzle.
It’s winter, it was 39°F out late this afternoon, but it was partly sunny with a little breeze. What else to do but put on a sweater and throw a top round/London Broil on the grill?

This was one of my better steak efforts, probably helped by tenderizing and marinating with wine vinegar (among other ingredients) for several hours beforehand. Wife thinks we can thin-slice the leftovers and pan-fry it, to warm it up without making it tough.

We shall see. Tomorrow, Daughter Dearest heads back to school, and I’ll say farewell to staycation and head back upstairs to the homemade worker’s paradise. But I’m making turkey chili for everyone.


As odd as it may seem to grill steak in January, one of my aspirations for 2021 (as listed in the previous post) is to re-focus on blogging. And not just shouting into the void (that’s what it feels like on Twitter quite often), but reading other blogs. There were a couple things some years back that we once had, but have no longer:

  • First, Safari (my browser of choice) used to have an RSS reader built-in. It was really easy to put my blog-buddies in a bookmarks folder, and put that folder on the Bookmarks bar. The folder would show the number of unread posts. I’m sure Apple had reasons to move the RSS reader to Mail (still scratching my head about that, though).
  • Second, Google discontinued Google Reader, that many people used to keep up. Fortunately, many of us using Blogger had our links listed in our profile.

So, I opened the Blogs folder in Safari (the links to the blogs still work, even if the RSS doesn’t) to see how many were left. Then, I checked my profile list. Altogether, I found about a dozen blogs that still existed, and had been updated fairly recently.

Next step: find an RSS reader. I ended up downloading Vienna, an open-source reader for MacOS. I also splurged $0.99 for a Safari add-on that shows what RSS feeds are available on a site and supports copying selections to Vienna.

So now I have my blog feed back, and so far it’s working pretty well. And with that, maybe I’ll be better about dropping new posts more frequently.

LinkWithin

Related Posts Plugin for WordPress, Blogger...