Looking for writing-related posts? Check out my new writing blog, www.larrykollar.com!

Saturday, September 28, 2019 No comments

At last… breaking in our new old camper

Beats camping in a tent, says my 60 year old back.
Not quite everything came together last weekend, but good enough: Mason had fall break, I finally got a plate for the Starflyer, we have M.O. the B.B. (Massive Overkill, the Big Butt, aka The Boy’s moving truck)—and most important, we got a brief break in the constant 90F+ weather. Time to go camping, dangit!

There were a couple of maintenance items I wanted to deal with on the Starflyer before we left, so I opened it up in the driveway Thursday evening. I poked at things, and Mason figured since we had it set up, we might as well sleep in it.

Why not? Of course, that meant Charlie would be sleeping with us, but he thinks the camper is really fun to hang out in. So that’s what we did Friday night.

I’m not ready to go to sleep just yet!
I was worried about Charlie’s sleeping arrangements—he’s a flip-flopper in bed—but then I looked under the dining table. A little experimenting found that two of the seatback cushions fit perfectly in the space where the table (usually) goes, and a crib sheet fits perfectly over them. I put the table outside, and had Charlie’s sleep cave set up in no time.

Of course, when Mason got in bed (back-side bunk), Charlie decided that was the perfect place for him to sack out as well. Mason protested, but Charlie didn’t give him too much hassle and both the boys were asleep before too long. I scooped up Charlie and put him in his sleep cave, adding a cushion at his feet in case he decided to migrate. He woke up in the 3 a.m. hour, which isn’t unusual, but I understood his motivation. The low that night was around 58F, and there’s not a furnace in the camper, and one blanket wasn’t sufficient. Charlie likes his feet cold, but not that cold. I put him in bed with me, made sure he was covered, and tried to warm his feet up. He pulled up close until he got slightly warm, then rolled away.

Saturday morning rolled around, and Mason was itching to get on the ROAD. I had a similar itch, but knew there were a couple things I needed to take care of first. One was easier than expected, one was close to estimated effort, and one was beyond ridiculous.

The easy one turned out to be the weatherstrip under the front (large) bunk. It's basically a plastic angle bracket, and all but about 6 inches had detached and was laying loose. The previous owner just stuffed 2" A/C foam in the gap and called it good. At first, I thought I might have to push the bunk in a couple feet, lay on the floor, and staple it up—instead, pushing it in about a foot was enough to kneel on a cushion and do the job.

Next up was the sink faucet. Starcraft cut too much wood out of the countertop for the faucet, leaving the screws in the back trying to grab air. Someone came up with the “clever” idea of turning it backwards, allowing the hand pump to function… but with any torque in the opposite direction, the faucet lifted off the countertop. My clever idea was to use longer screws, because there was some wood for them to bite into down below, but it didn’t work. My solution was to replace the wood screws with long machine screws, using a washer and nut to hold it in place. It worked! Longer-term, I’m going to replace that countertop.

The hard one was the tires. They want 80PSI(!), and my air compressor had a cracked hose. Try as I might, I could not get more than 50PSI into the tires. Fortunately, I was trying this part on Friday evening, so I knew I needed to get a new air hose on Saturday. But then I had to find a connector that the air chucks would snap into, and find an air chuck that would actually push air into the tires. Fortunately, I had them here at the manor. The spare needs to be replaced, because it has cracks in the sidewalls, but the primary tires were fine and I was only going 40 miles.

Time for the main event! I backed M.O. the B.B. into position. A few years ago, I was coming home from work and found a drawbar with a 3-1/2" drop on the road… with a 2" ball, which just happens to be the Starflyer’s size. In a way, someone’s loss was part of what got me serious about finding a camper. I really need a 6" drop drawbar with this behemoth, but it got us there and back.

Now let me tell you about M.O. the B.B. Earlier this year, The Boy needed a truck to pull the 26' moving trailers he was using for his new business. Due to a number of circumstances, mostly having to do with my employer getting acquired, I had a large pool of cash in a brokerage account. I figured that (assuming the business worked out) I could get a better return on investing in Let’s Get Movin’ than any CD and most stocks. So we bought him this gigantic TPC: a Ram 3500 diesel dualie. I’m not exactly sure what the tow capacity is on this thing, but it’s measured in tons. The Starflyer’s empty weight is 1700 pounds, and I would have to pack lots of junk to get it to a single ton.

The other thing: I had hoped The Boy would come with us on this trip. I had planned to give him and Mason the big bunk up front, and I’d go to the back of the camper. It would have been worth it.

But I digress. As expected, the truck was going “Trailer? I’m pulling a trailer? Really?” all the way to the campground, LOL. The dualie’s big butt is wider than the 7-foot camper; so I knew if I could see stripes in the side-view mirrors, the Starflyer was on the road. It inspired confidence… which evaporated as soon as I tried to back into the site we selected. I need lots of practice backing a trailer. This was something I was hoping The Boy would help me learn. But I figure he was having a good laugh at my expense, as Mason kept going “You’re about to hit the TREE!” and similar sentiments. Eventually, I got it backed in, detached, and we got set up. I had a leveler and extreme-heavy-duty extension cord, but neither were needed. There was some drama associated with the water hookup, most of which was debris in the threads, but I think a new washer will fix it. The A/C was less easy to deal with: it spun up, but I didn’t feel any air coming out the vents (cold or otherwise). After about 15 minutes, it shut down and would not start again. I think something froze up and blew a fuse.

Otherwise, I think the spot I selected was perfect: right across from the bath house (the Starflyer has a Porta-Potti, but that’s for late-night needs), almost across from the playground, and a short walk to the lake. Of course, the lakeside sites were occupied, but we had plenty of space. Mason spent a lot of time fishing (no luck) and meeting other kids more or less his age (better luck). I cooked meals, rode my bike around a little, and had some quality time with my Kindle. If you’ve never been camping, and have kids, you’re missing out on a huge opportunity. The kids take off, and leave you with lots of quiet time. I remember this from the camping trips we took when I was a kid… thankfully, some things don’t change.

Sunday had us going to Newnan for Zoey’s birthday party. That ran longer than I expected (and Mason hoped), but we still had lots of fun and I let Mason stay up late to compensate. He rode his bike around the dark campground until 10:30 or so, then he was ready to pack it in for the night.

Breakfast, anyone?
Each morning. I used the inside stove to heat water for my French press, and poured the excess into a pump pot for washing and the like. For everything else, I have this three-burner Coleman white-gas stove that the father in law gave me. It must be close to 50 years old, at a minimum. I replaced the pump seals a year or two ago, and there was still pressure in the tank when I opened it Saturday morning to add fuel! Bacon and eggs in the morning… breakfast of champions.

As expected, Mason made himself scarce for the breaking-camp part on Monday morning, despite me telling him we had a pretty tight schedule (I had a work call at noon). I got him to chuck a couple things into the truck, but that was about it. Fortunately, I had planned for that. I got camp broke down, and we got on the road in good order.

The big question now is: how soon can we get out again? The way things are going this year, we should have good camping opportunities (weather-wise) well into November and maybe later.

Sunday, August 18, 2019 2 comments

All the boys

I found this after the fact: Mikel, Mason, and Charlie, all in one pic. It was from last December, when he came up to spend Christmas with us. This is one of the few shots I have of all three of my boys in one place… and almost certainly the latest.

The boys hanging out

Gotta love the Pocahontas pillowcase that I gave Mikel that night!

Friday, August 16, 2019 5 comments

The Boy takes the exit

This is one of the hardest things I’ve ever had to write: The Boy has begun his longest journey. A permanent TB01. You-know-what this.

A walking Father's Day card;
My oldest and youngest;
The last pic I have of us together.

Mikel lived for 31 years and change. We might think of that as a short lifespan nowadays, but he lived more in those 31 years than do some who get three times that. Even on the day he was born, he wasn’t messing around. At age 5 minutes, he launched himself right out of my arms—fortunately straight at the pediatrician. (That inspired the birth scene in Pickups and Pestilence, of course.) On the way to the hospital room, I noticed how he was watching everything.

He never let up, really. He said his first words at 9 months: “ite” (light), “da-dahhhh” (me), “uht-ohhh,” and by 18 months he was speaking in complete sentences. He was also climbing before he was walking. He hated barriers—and would always try to figure out a way to get around, over or through—but loved the challenge.

And man, did he ever tackle the physical challenges. By age 4, he thought nothing of being 30 feet up in a tree. I used to joke that he was born with a No Fear sticker in his hand. At a birthday party back then, a bunch of boys were climbing a tall pine tree in the host’s front yard. A 12 year old shouted “Get out of the way!” at Mikel, as he was climbing up. “No!” Mikel retorted, and scrambled even higher. The older boy started after him, then looked down… and back at Mikel, continuing to gain height, back down, back up (he was still climbing)… and decided he was going to sit this one out. Fortunately, early on I taught him that whatever he got up, he could get back down. That probably saved me a few heart attacks, and one or two calls to the fire department.

Intellectual challenges were tougher. He and his mom (and Mason) love to butt heads, and they went at it with gusto in his teen years. But in the end, those are emotional challenges. Part of his many problems, that I chronicled in the early years of this blog, likely were because Sector 706 doesn’t exactly abound with intellectual challenges. I don’t have to repeat those years here; you can go check out the archives if you want all the gory details.

I believe the turning point was his two years in Manitowoc. When I went to see him in 2012, it was obvious things had turned out the way I had hoped they would. He had become the adult of the house, perhaps because he no longer had the old safety net to rely on. It also helped that he finally made a permanent break with Snippet (who wasn’t and isn’t an evil person, it’s just that Mason is about the only good thing to come out of that relationship). Wednesday, my sister in law said that she noticed how happy I was during the time I spent on the east side of Lake Michigan after I got off the ferry.

Some time after, he returned to Planet Georgia, and it wasn’t long before he met his wife to be. They got married, and I keep laughing every time I re-read the phrase “we smelled like dead water buffaloes by the end of the evening.” August on Planet Georgia is not the time to spend hours outside.

Actually, it would be best if one could sleep the entire month away. Like the song doesn’t quite say, August in Georgia is just no place to be.

But I digress.

The marriage was fitting for Mikel: another challenge, but one they both overcame in the end. We have Zoey (aka Grandkid #2), and (like Charlie) she adores Mason. Good people, and I won’t let anyone diss my daughter in law. BTW, Daughter Dearest has Grandkid #3 on the way…


Last year was the beginning of the end. In prehistoric times (aka before I started blogging), Mikel became diabetic at 16, and he wasn’t happy about it (is anyone?). I can still remember that day he kept going down, and going down, and I finally made an executive decision to take him to the ER. I had to help him walk into the hospital, and that wasn’t easy because he was a heavy kid back then. Turns out I’d not helped things by giving him sports drinks to fix his dehydration symptoms—his glucose level measured around 1600 (normal is below 100)… so his blood was basically fruit punch. His survival was touch and go, but once again he overcame the challenge. One of the funnier things I remember about that whole ordeal was the presentation the hospital put on. I don’t know if Mikel paid attention or not; I just remember a black girl a couple of rows up turning around to check him out. A lot. (She was cute, but I think Mikel was too busy trying not to pay attention to anything to notice. I hope she’s doing OK, whoever and wherever she is today.)

But again, I digress.

In the last year or so, Mikel finally found his purpose. He got a job with Hewes Family Movers, and was soon a crew chief. I need to call this guy and thank him. He encouraged Mikel to start his own moving company, Let’s Get Movin’. We helped him get a truck—and he was by-God paying us back for it. Mr. Hewes would loan him trailers if he needed them, and Mikel was working on getting one or two trailers of his own. That didn’t come to pass, which might have been for the best under these circumstances. But it was obvious to us that Mikel had finally found his niche in life. He not only had an occupation that didn't keep him in one place, he was THE BOSS. We had planned to set up his website in the next few weeks…

Mikel’s pancreas did him in, in the end. In the last year or so, he started having seizures. The seizures got really bad last November, and he spent Thanksgiving in the hospital. That’s when my wife and his really got together and made sure he was getting the care he needed. His short term memory got clobbered, even worse than mine, in the end. The neurologist told them Mikel would probably not survive another one. And then…


Lately, Mikel had been coming up to FAR Manor a lot to visit us. I don’t know if part of him knew what was coming, and who cares if it’s important? The fact was, he was around. He and I got to hang out mostly on weekends, and he and his mom got to hang out on weekdays. When the engine in Sizzle’s truck lunched out, and they found a motor somewhat north of Nashville, he and Daughter Dearest took a road trip to pick it up.

He made a point of telling us he loved us—one could say it was redundant, because his presence made that clear, but it’s always good to say it. We had been talking about things we were going to do in the upcoming months: he had costumes for all of us picked out for the Ren Faire (he as a barbarian, daughter in law a wood elf, me as a mage, and Mason a hobbit). In turn, I planned a trip to a campground/microbrewery/disc golf course in North Carolina next summer, and even talked about a Big Road Trip to Montana (my dad did that for a few summers to fish). Mikel said he always wanted to go out West to try snowboarding. Obviously, none of that will happen exactly as planned. But I want to at least do some of those outings in his honor.

It was a hard thing to tell Mason about it. Mikel had called his mom Thursday night, telling us he was going to go to Zoey’s orientation, then come up. So we all had expected him to be at FAR Manor Friday evening… but he never woke up. Mason took the news very silently, but cried later that night. The wife laid down with him after dropping a restless Charlie off with me.

There’s a lot of him in Mason—especially the intelligence, and the love of butting heads—and maybe there are at least some token intellectual challenges for Mason nowadays. Mason has the head for numbers that might have skipped Mikel (the way visual art skipped me), and he fortunately hasn’t started to put on weight the way his dad and aunt did.

Tonight, or maybe tomorrow night, I’m going out to the graveyard with a lawn chair and a couple of beers. I’ll have one, and give him the other one. I’m not sure what I’ll tell him, but I know he’ll hear it. He probably has a busy schedule right now: helping the wife’s mom in the garden in the mornings, fishing with my dad in the evenings, and snowboarding and disc golfing in the afternoons. Then at night, he jams with the Heavenly Choir. I hope he tells Johnny Cash how much I appreciated his music during the breaks. God willing, I’ll have 20–30 years before I join him.

Tuesday, July 02, 2019 5 comments

Tech Tuesday: Y'all Watch This

While we were cleaning up the house, a Casio wristwatch turned up. Sizzle didn’t claim it, and I had never seen it before. Mason thought he might like to have it, once it had a battery in it. It has an analog face with a small LCD display, not terribly geeky-looking. I’m used to Casio watches having a tiny keypad and a zillion functions.

So I got out the little tools and the magnifying light, and popped the back off. There was the battery, but the number (16xx) was a new one, and there was a small metal clip holding it down. Not seeing an obvious way to get it off, I did what anyone does these days: Googled for instructions. The watch is a Wave Ceptor, and the first thing that popped up is “this watch has a solar panel and a rechargeable battery.” It was a bright sunshiny day, so I put it back together and stuck it in the window. Sure enough, after a few hours, the little display coughed to life, showing what I thought at first was t  1.

We get signal.
Having no idea what to do next, I headed back to Google to find a manual. That’s when I found out you need only set the timezone and the watch does the rest, using a long wave receiver at night to download the time from WWVB (if using a North American timezone). The link has all the gory details, but WWVB transmits time data at a blazing 1 bit per second (actually, it's a tri-state, with values of 0, 1, or marker—does that make it a trit?). The watch tries receiving at the top of each hour from midnight to 4 a.m.

Just for grins, I watched it the other night. Sure enough, it showed its “receiving” display at 1 a.m., made a small adjustment, and moved on.

The other thing I found out was that the first display I saw wasn’t a lowercase T, it was 土 (an abbreviation for Saturday in Japan). The watch’s epoch (first time) is January 1, 2000. It also has a “Y2.1K” problem, in that its year doesn’t go past 2099. If it’s still around then, I guess one of Mason’s kids will have it.

So once again, Casio made a geeky watch—but this time, they hid the geekiness on and under the face. Oh, and it does have a stopwatch, alarms, and a “world time” mode (uses the little LCD to show the time in a second timezone). It has a light, but the hands and numbers are phosphorescent, so you can at least see what time it is in the dark without using the battery. Putting it in a sunny window for half an hour is more than enough to keep it running another day.

So we tried to put it on Mason, and his wrist is too skinny for a large-face watch like this one. I’d been wearing an iFitness watch for a while, but it often misses steps and has lately developed a habit of trying to pop out of the band (I lost it for over a week that way). It has a decent sleep monitor, and my phone does a better job of counting steps, so now I wear it at night and the Wave Ceptor during the day.

Thursday, June 27, 2019 2 comments

Adventures of a #techcomm Geek: A Cautionary Tale of an Acquisition

Pull up a chair, young’uns. Today, I bring you a tale from a time when years started with a 1. It was a technologically backward time, before email had yet to completely replace paper memos and USENET or BBSes were how most people “went online.” But the technology we had, we used well. It didn’t require LinkedIn to help empty out an office when things went to #3||.

The 80s were in our rearview, although its music lives on to this day, and the corporate merger and acquisition binge was starting to cool off. Still, buying and selling is the lifeblood of a corporation, and sometimes what they sell is pieces of themselves. So, on to this particular place. None of the players are around anymore, so let’s call it Don’t Care Anymore (DCA). It was a “coulda been” company—I’ve worked at a couple of them. DCA, with some vision and luck, coulda been Cisco. The founder held the (now expired) patent for statistical multiplexing, and they did good business building and selling serial port multiplexers. (Remember, this was a technologically backward time, when some people still had serial terminals on their desks).

But even then, Ethernet was beginning to worm its way out of the server rooms and developer offices, and into the office as a whole. There were competing networking technologies, most notably Token Ring (mainly in IBM shops), and Ethernet at the time required relatively expensive coaxial cable. Many companies still thought serial terminals connected to a VAX or IBM mainframe were adequate; some had PCs for word processing and spreadsheet software (“Lotus 1-2-3,” look it up, kiddies), but the PCs still had a serial connection. You see, networking applications like email, file sharing, and (for forward-looking companies) USENET were things that ran on mainframes.

There were some good ideas going on—the serial concentrators got an Ethernet card, and DCA bought a company making a T-1 transceiver (basically a really high-speed modem that could carry data, voice calls, or any combination). The developers were also working on what amounted to an Internet router. Had executive management given it more focus, things might have been different… but what they called “networking” was only one part of the company, and the execs considered it the unimportant (if original) part. They were focused on selling a hardware/software combo that allowed a PC to emulate an IBM3270 terminal. It was an amazingly high-margin product for the PC market, and the execs had little headspace for anything up-and-coming (despite handwriting on the wall, like a declining market for IBM mainframes and chipsets that would slash the cost of the hardware component to nearly nothing).

So, the execs found a buyer, and sold the networking division to another company. Let’s call that outfit Really-Moronic (R-M), for reasons that shall soon become obvious. Long story short: there was a lot of goodwill on our part, because we felt like we were actually wanted, and they threw it down a rathole.

You see, DCA had a pretty decent benefits package. The Boy and Daughter Dearest were both born when I worked there. Wife-unit was working as well, and her benefits were on par with mine. The upshot was, “childbirth” was covered at 80% for each of us. So one package picked up 80% of the bills, and the other got 80% of the remaining 20%… which meant a $10,000 hospital bill became $400 out of pocket.

It was a good thing we had our kids before the acquisition. R-M’s healthcare package, compared to DCA’s, was terrible. I ran the numbers, and it amounted to a 7% pay cut. It didn’t help that R-M’s VP of HR (are we choking on the acronyms yet?) both misled and outright lied to us about the benefits:

  • We got yearly bonuses at DCA. When asked about that, he replied “Sure, I get a bonus.” He neglected to mention that only management got bonuses. Deliberately misleading. So on top of the 7% pay cut on the healthcare front, we lost a bonus averaging another 7% per year.
  • Asked about the healthcare package, he replied “it’s comparable to yours.” An outright lie, unless he meant “our package looks terrible by comparison,” or management had a better package.
  • They moved our office to Dunwoody, claiming it was a more central location—another lie, they chose the office to avoid building out a computer room. One of the things people liked about DCA was that exurbia had little traffic. It was an easy commute. People moved nearby to take advantage of low(er) housing costs. Dunwoody added a good half-hour or more to the commute time, each way. We shared a high-rise with a couple other companies, including AT&T. Ma Bell’s kids were really nice people, who invited us to their company BBQs and the like. Having good corporate neighbors took some of the edge off the relocation, but certainly not enough to make up for the increased commute time.

The benefits disparity had to come up during the due diligence that any company has to do when they’re buying another company (or a large part of one). Did R-M think that people would just shrug and take a pay cut on top of the overt disrespect, especially the highly-talented engineers and support staff who do the magic that makes a tech company profitable? Did they really believe that skills aren’t transferable? Or were they so arrogant that they thought it wouldn’t matter?


A round of layoffs hit. One manager, told he had to cut one person in his department, laid himself off. After that, no layoffs were needed; the talent started draining out the door. R-M made a few half-hearted efforts to stem the outflow, paying out a token one-time bonus and hiking the raises to cover some of the difference in the benefits packages. But we were still taking a significant pay cut for a longer commute, and word got back that the new owners considered us “losers and whiners.” That, as you might imagine, did nothing positive on the goodwill front.

Our boss was the first of the documentation department to depart. The new boss was several hours away (by plane), which meant we mostly managed our own affairs. We became Resume Central for the rest of the office, in between our own job hunts and departures. After a few months of searching, I hooked up with a reputable contract house and spent about a year bouncing around from place to place. R-M sank like a stone, and nobody remembers them. Ironically, the parent company retooled and is an important customer of the place I work at now. DCA also disappeared, bought by a competitor who did a better job of understanding the changing landscape.

Moral of the story: employees aren't stupid. They recognize a significant pay cut when it happens, and they recognize a lack of respect. Combine that with a robust tech job market, and you might find money you spent on that big acquisition going down the drain… and taking you (and your CEO’s reputation) with it.

Sunday, May 19, 2019 1 comment

Fixing supper

The local Kroger recently set up a refrigerated kiosk with “Home Chef” meals. These are boxed meals with two servings, running $17-$20 per box depending on what’s in the box. I’ve seriously been considering setting something up with Hello Fresh, or any of the myriad other players in this space, so I picked up a box to see how things would go. It featured (boneless) pork chops, mashed potatoes, and snap peas. Sounded pretty good, anyway.

Saturday evening, I got the box out and got to work. Now I had expected everything to be mostly ready to go—sure, I’d have to fire up the oven and what-not—but reality smacked me over the head with a raw pork chop. What was in the box was: raw ingredients, and a recipe. I had to string the pea pods, cut up two whole potatoes, put the breading on the pork chops, and cook the sauce. So what this amounted to was, a box of raw ingredients and a recipe card. The card said this was “intermediate” difficulty (gee, that would have been nice to put on the outside of the box), but I didn’t have any trouble putting it together. My technical writer (a/k/a work) side pointed out where the recipe sequence could be improved. The recipe did say to add some stuff like olive oil, salt, and pepper. I substituted NoSalt for the salt, and nothing turned weird colors or exploded.

Except that midway through cooking the potatoes (that I had to dice up myself), I realized I’d forgotten the second spud. In an inspired moment of panic, I cut up Tater#2 and threw it in the microwave for 3 minutes, then chucked it in the pot with the other one. This was the first time in my entire life that I made mashed potatoes from scratch, and in the end it was okay.

So was the rest of it. It actually turned out to be a pretty pleasant meal; we had our dinners, and Charlie sat between us and deconstructed a liverwurst sandwich. (Hey, if he eats the meat before the bread, fine.) The wife isn’t a big fan of snap peas, but Mason will have a side dish when he comes home (he went home with The Boy tonight). She also pointed out that russet taters are white, and you need to peel white potatoes (red potatoes are fine if you include the peels). The recipe card said “cut up the potatoes,” and the picture showed the peels still on, so that’s how I went. I thought the cream sauce that the chops floated on did a fine job of mitigating that bitter taste that comes with russet peels, but what the package provided wasn’t enough to cover them.

The upside is, the recipe card provides the ingredients list… so I can do this again, and improve on things instead of buying the box. Maybe I’ll double the recipe so there’s four servings (which would cover Mason plus some leftovers for work), and double-double the sauce/gravy recipe. Substitute red potatoes for the russets, or peel the russets.

Anyway… if this is what pre-packaged meals offer, I don’t see a lot of value. In the end, I might just mosey over to Publix instead. They provide recipes for meals like this, and give you the list for all the stuff you need (some of which you may already have). No pretense, and (especially) no markup for what amounts to packaging. But it was a valuable experience. Now I know what to do with Panko breadcrumbs, I can smash potatoes with the best of 'em, and maybe I’ll substitute a carrots/onions combo for the snap peas if I make this again. I’m sure it will end up with a lot less sodium than the original.

In the end: three stars. The food was fine, but doing some of the prep work would have been nice. I’m certain the value proposition is heavily weighted in favor of buying the ingredients individually.

What I really need to do is go back to my single days: plan out the meals for the week, figure out what I don’t have, then shop accordingly.

Thursday, May 16, 2019 No comments

Adventures of a #techcomm Geek: Sharp Edges when Rounding

One of the advantages of using a text-based markup grammer for documentation—these days, often XHTML or some other XML, but could be Markdown, Restructured Text, Asciidoc, or even old-sK001 typesetting languages like troff or TeX—is that they’re easy to manipulate with scripts.

There are quite a few general-purpose scripting languages that do a fine job of hunting down and acting on patterns. I’m conversant with Perl, and am learning Python; but when I need to bang something out in a hurry and XML is (mostly) not involved, Awk is how I hammer my nails. Some wags joke Awk is short for “awkward,” and it can be for those who are used to procedural programming. Anyone exposed to event-based programming—where the program or script reacts to incoming events—will find it much more familiar. Actually, “awk” is the initials of the three people who invented it: Aho, Weinberger, Kernighan (yes, that Brian Kernighan, he who also co-invented the C language and was a major player on the team that invented Unix).

Instead of events, Awk reacts to patterns. A pattern can be a plain string, a variable value, a regular expression, or combinations. Other cool things about Awk:
  • Variables have whichever type is most appropriate to the current operation. For example, your script might read the string “12.345,” assign it to x, then you can use a statement like print x + 4 and you’ll get 16.345.
  • The language reference (at least for the original Awk) fits comfortably in a manpage, running just over 3 pages when printed. Even the 2nd edition “official” reference is only 7 pages long.
  • It’s a required feature in most modern Unix specifications. That means you’ll always have some version of Awk on an operating system that has some pretensions to be “Unix-like” unless it’s a stripped, embedded system. On the other hand, even BusyBox-based systems include a version of Awk. Basically, that means Awk is everywhere except maybe your phone. Maybe.
If your operating system is that Microsoft thing, you can download a version of Awk for it. If you install the ISH app, you can even have it on an iPhone.

Now what am I going to do with it?

Okay. I told you all that to tell you this.

I’m working on something that extracts text from a PDF file, and formats it according to rules that use information such as margin, indent, and font. It requires an intermediate step that transforms the PDF into a simple (but very large) XML file, marking pages, blocks, lines, and individual characters.

“But wait a minute!” you say. “I thought Awk only worked on text files. How does it parse XML?”

Like many useful utilities first released in the 1970s, Awk has been enhanced, rewritten, re-implemented from scratch, extended, and yet it still resembles its ancestral beginnings. The GNU version of Awk (commonly referred to as gawk) has an extensions library and extensions for the most commonly-processed textual formats, including CSV (still beta) and XML. In fact, the XML extension is important enough that gawk has a special incantation called xmlgawk that automatically loads the XML extension.

The neat thing about xmlgawk, at least the default way of using it, is that it has a very Awk-like way of parsing XML files—it provides patterns for matching beginnings of elements, character data, and ends of elements (and a lot more). This is basically a SAX parser. If you don’t need to keep the entire XML file in memory, it’s a very efficient way to work with XML files.

So. In most cases, I only need the left margin of a block (paragraph). Sometimes, I need the lowest extent of that block as well, to throw out headers and footers. I need to check the difference between the first and second line (horizontally), and possibly act upon it.

In the document I used for testing, list items (like bullets) have a first line indent of –18 points. “Cool,” I said. “I can use that to flag list items.”

All well and good, except that it only worked about 10% of the time. I started inserting debugging strings, trying to figure out what was going on, and bloating the output beyond usefulness. Finally, I decided to print the actual difference between the first and second lines in a paragraph, which should have been zero. What I found told me what the problem was.

    diff=1.24003e-18

In other words, the difference (between integer and floating point numbers) was so miniscule as to matter only to a computer. Thus, instead of doing a direct comparison, I took the difference and compared that to a number large enough to notice but small enough to ignore—1/10000 point.

And hey presto! The script behaved the way it should!

It’s a good thing I’ve been doing this at home—that means I can soon share it with you. Ironically, it turns out that we might need it at the workplace, which gives me a guilt-free opportunity to beta-test it.

Wednesday, May 15, 2019 No comments

The Dresser Purge

In the brief two years I was on my own, I concluded 15 changes of clothes was the ideal number. It let me do laundry every two weeks, with one extra pair just in case I had to postpone laundry day.

Clothes accumulate, like everything else, and these days I have a lot more than 15 changes. And somehow, laundry day is twice a week—actually, that makes sense. Four people in FAR Manor means four times the laundry, right?

After the Great Closet Purge, I started putting out of season clothes in a storage bin I kept in the closet, to relieve pressure on the bulging dresser. This worked for a while.

De-bulging the dresser
But the warm weather got to Sector 706 couple weeks ago, and I got the bin out to swap stuff around. Being about 35 pounds lighter than last year, I tried on shorts… and if I could pull them off without undoing them, and half of them fit the description, they began the purge pile. Then I tried shorts that wintered over in the dresser (because the bin was crammed full). All in all, I shed eight pairs of shorts, including one that still had tags on it. There were also eight pairs of swimsuits between the bin and dresser… where did they all come from? I decided three pairs was plenty, and added the rest to the purge pile. I got the now-too-big pants out of the closet and tossed them on.

Then came the T-shirts. I weeded them out, and finally the purge filled a large garbage bag. Except for the three remaining swimsuits, my bottom dresser drawer was empty and the other drawers had headroom. And there was plenty of room for the winter clothes in the bin. But I think the shirts in my closet have decompressed, because now it feels as packed as before. I should probably weed them out again; if I lose a few more pounds, I might be able to go from XL to L.

I still have way more than 15 changes of clothes. Even with more frequent laundry, I probably don’t need to cut down to 8 or 10, though.

Wednesday, April 17, 2019 No comments

Charlie, soccer, and a few mini-rants

With a new car in the garage—a 2019 Kia Soul EX—I now have that critical extra seat to take both Mason and Charlie places. I still have the Miata, but I won’t be putting all the miles on it anymore. Of course, that means I “get” to take Charlie to Mason’s soccer practices… which means I don’t get to sit and chat with the other soccer dads quite so much.

The upside is, we bring Charlie his own soccer ball, find an empty nearby field, and let him wear himself out dribbling the ball around. He was, despite his best efforts, completely zorched when we got home tonight.


He’s not terrible at ball control, which isn’t something you can say about many U8 or even some U10 players. His throw-in technique is better than half the players in Mason’s U10 league—ball overhead, both feet planted, no coach could ask for more. His birthday was 8 days past the cut-off for “U4 mini-league” this spring, but I’ll sign him up in the fall. It’ll be hilarious, watching a bunch of 3 year olds swarming the soccer ball… or sitting in the grass and playing in the dirt… (BTW, that’s Mason wearing the red/orange shirt in the background, flailing his arms. He scored a personal-record five goals in last Saturday’s game, although I only saw three because I was busy trying to keep Charlie from bolting onto the field.)

Mini-rant #1: How to get me to sign up for auto-pay
Somehow or another, I missed setting up the payment for last month’s cellphone bill. In a highly uncharacteristic move for AT&T, they didn’t immediately send me a “hey, pay up” email, text, or anything else. I had this nagging “did I pay them?” thing going on, but figured they would let me know if I hadn’t. So I go online to pay this month’s bill, and find the bill is about double what it usually should be. Whatever, I thought, and clicked “Pay My Bill.”

The website immediately started grinding, trying to get its act together, but enough time went by for it to pop up a “hey, are you still there?” notification. I gave up, figuring it was just a temporary glitch. (AT&T’s “up”dated website is gobs slower and far less responsive than the old one, BTW.) Then they had the nerve to pop up a “how are we doing?” notification. I let them know, in spades, then closed the tab. Trying again this evening gave me the same results. I finally went to pay it over the phone using the convenient *729 number. It asked me if I wanted to set up auto-pay… and yeah, why not? Most of my other monthly bills are on autopilot now.

So that’s how to get me to sign up for auto-pay. Conveniently forget to tell me I let one slip, then hose up your website to the point that I can’t get things caught up when I find out.

Mini-rant #2: When auto-pay gives you an Epic FAIL
And then, there’s the credit union’s credit card. I happened to be home last week one afternoon, and the home phone rang. The caller ID read CARSERVICES. Figuring this was a telespammer selling extended warranties, I answered to tie up the phone line (the longer you keep those @$$#0|3$ on the line, the less time they have to bother someone else). To my surprise, it was the credit union, wondering why I hadn’t paid my credit card balance.

“Huh?” I asked. “I had auto-pay set up.”

“Did you pay off the balance?” (I had, two months prior.) “If you pay off the balance, auto-pay automatically cancels.”

Surprise!

I happened to have the credit union website up on my computer at the moment, so I set up an immediate transfer and all was well. Except that I was miffed about auto-pay getting canceled without so much as a “good job, dude, and sayonara” message. Unlike mini-rant #1, I hadn’t forgotten anything—just ASSumed it was taken care of. The other credit cards I have on auto-pay just don’t transfer anything if I haven’t put anything on them, or pay off the balance if it’s less than what I set up on a monthly basis. There’s always a joker in the deck.

Mini-rant #3: Taxing taxes
Unlike many people, I don’t mind paying taxes. They keep the roads paved, provide food and healthcare to (not enough of) those who need it, run schools, and keep essential emergency services going. Are there things I wish they would do instead of other things I wish they wouldn’t? Oh heck yes. But overall, it’s better to contribute to the general welfare and reap the benefits. If you want to see what happens when you don’t have taxes, spend a few months in Somalia.

Anyway. I’ve been pretty good about getting the federal/state tax returns done in recent years, usually in late February or early March. This year was different, through no fault of my own for a change. We got our W-2s (as usual) right at the end of the January 31st deadline… but before I could grab the tax software and get to work, I got an email from work. In essence, it said, “the payroll company screwed up the W-2s, and we’ll get fixes to you ASAP.”

Weeks went by, and then months, without fixes. Some of us would email HR on occasion, and get the same response: “they haven’t fixed it yet, we’ll let you know.”

FINALLY, in the first week of April, they rolled out the fixes. It just so happened that I was out of town that week, so it was the week after before I could do anything about it. The wife and I both have business stuff to deal with, so it’s not just a matter of slapping down a few numbers and sending it off. Fortunately, it turns out the IRS has a way of filing for an extension online… and I wasn’t the only one who was up against the gun. The father in law needed some extra time as well.

With any luck, I’ll be able to finish up this weekend. Even with all the games Ch*mp played with withholding, there should be a refund.


Sound off!
What’s your rant du jour? Or maybe you have a new car you want to tell me about? :) Drop a comment, I love 'em.

Sunday, March 24, 2019 1 comment

Losing a Charlieweight

About six months ago, my weigh-in at the doctor’s office was not a happy occasion for me. I came in around 234 lbs, the most I’ve ever weighed. The doc didn’t give me too much grief about it, but suggested I try to get more active.

Fortune was looking out for me, though. Work and the group insurance team up to sponsor a program called “Naturally Slim.” “Lose weight while eating the foods you love,” the website proclaims. Yeah, by not eating very much of it, I thought, but figured I needed to do something. So I signed up.

Turned out I was right. But the part I missed was, they give you the tools to eat less… or at least remind you of what the tools are. What makes it work is, they tie the tools to their purpose (which in this case is getting to and maintaining a healthy weight without starving yourself). It boils down to three core principles:


  1. Eat when you’re hungry (but before you get to that RAW MEAT NOW!!!! stage).
  2. Eat slow.
  3. Stop when you’re full.


There’s more to it, but all the “more” is to support those core principles.

Yeah, yeah, so how’s it working?

Together, we weigh what I used to weigh
on my own. (Photo credit: Mason)
Quite well, actually. There have been times I’ve fallen off the wagon, but all that means is that you jump back on. I can now wear all the pants I couldn’t before because they were too tight, and have had to ditch some that won’t stay on anymore. My belt is at the tightest notch, and in the last week I’ve been trying to pull it in yet another notch… time for a new belt. I passed my current goal, 199.9, this last week. Since Charlie is 34 pounds right now, I’ve lost an entire Charlie worth of weight.

I had to celebrate with an “oil change,” that is, a chili dog and onion rings from Varsity Jr. I ate it slow and enjoyed every bit of it… and it was just enough to get me full. And that's another advantage: if you go to a restaurant, you can often get three meals for the price of two—or even two for the price of one. Or you can order off the value menu and save about half what you would usually spend. For example, I hit upon a "mini" quesadilla and nachos combo at Taco Bell that costs about $4. I can order it on my phone from the office, and it's ready (or nearly so) when I arrive to pick it up.

Next goal is 194 lb, which is the lowest I’ve weighed since moving to FAR Manor. I’m not sure I’ll be able to reach my final goal of 185 lb, but it’s something to aim for.

Thursday, February 28, 2019 No comments

Adventures of a #techcomm Geek: Info Architecture

In this adventure, we find that structure isn’t always structure. And sometimes, the structure jumps up and smacks you to get your attention. More geekiness follows…


Image: openclipart.org
As part of our conversion to DITA at work, I shuffled some things around in the huge manual I work on. I moved a huge wad of reference material into an appendix; other content can easily link to it when needed. But the reshuffling got me to take a look at the reference material.

Managed network devices, like the ones I usually write about for work, usually have a way to message the mothership about various issues. Examples include:


  • Hi, I’m online.
  • The power’s out here. I’m running on my battery.
  • Here’s some stats from the last connection.
  • One of my components just failed!


The messages aren’t that chatty, of course, and they often include some variable data. Some are more urgent than others, and might require some action by the network operators.

I had separate topics describing each message, and they came out of the conversion tool as concept topics—a lot more generic than I wanted. As I was trying to get everything done at once, I didn’t give it too much thought. Since the messages were reference material, they would be fine as references. I split them into sections (format, severity, cause, action), and moved on.

DITA to the rescue? Um… nope.


Later on, I came back to the messages. “There has to be a better way,” I thought. After all, the sections could get out of order, or end up with different titles—there’s all sorts of ways to be inconsistent with reference topics. My next thought was, “Hey, DITA has hundreds of elements, and its prime purpose is software documentation. There's probably an entire message domain waiting for me.”

In reality, there are three message-related elements in the entire ocean of DITA, and two of them are inline (<msgph> and <msgnum>). The third is <msgblock>, for tagging message output.

Ah, the joys of information architecture. Creating a message domain from scratch was a possibility, but would likely be a hard sell to the co-workers.


We’re in trouble(shooting) now


I gave a moment to the idea of using troubleshooting topics—then it hit me. A message has a condition (the message itself), a cause (why it was logged), and a solution (what to do about it). That’s exactly the structure of a troubleshooting topic!

The only sticky point was where to document the message format, and I quickly decided that was part of the condition. I used @outputclass="message" to tag the topics, and to have the transform use Format: instead of Condition: for the condition part. I converted a few to troubleshooting topics, and it worked as well as it seemed it would.

On to the next thing


Then yesterday, I got a meeting invite with an attachment, a follow-up to a discussion a few of us had last week. One of the groups in our far-flung department uses InDesign to produce actual printed deliverables (how quaint!). The fun part is, the page size is about 4 inches square—so it’s not a matter of tweaking our transform plugin; we need a whole new one.

But when I started looking at it, the structure almost leaped off the screen, despite a couple of misplaced pages. Each chapter contained a single task, and each step used one page for substeps and graphics. Having that revelation made the call go a lot faster and more smoothly, because it was one of those things that are obvious once you see it. I just happened to be the first one to see it.

So I did a conversion dance, involving lots of pixie dust: PDF → Word, then Pandoc converted that to Markdown. After some serious cleanup (and moving misplaced content where it belonged), I used a couple of scripts to break the Markdown file into topics and create a bookmap. DITA-OT gobbled up the bookmap and Markdown topics, and spit out DITA topics. Thus, I had a pilot book we can use as test data for the transform.

The InDesign users also have a couple more formats; one is close enough to a regular book that we’ll have them use the standard transform. The other is a folded four-panel sheet… that one is going to be interesting. I’m going to have to resist the temptation of blowing off documentation work for glorious coding.

Stay writing… until I geek again.

Tuesday, February 26, 2019 No comments

A weekend at Camp Driveway

It has been a wet winter so far. We’re currently getting a few days of dry (and reasonably nice, for late February) weather… in mid-week, of course, when we’re all working or at school. But a couple weekends ago, we had a mostly dry weekend—that is, the rain didn’t arrive until Sunday afternoon. It was seasonably cold—around 50°F for highs, not quite freezing for lows.

Roughing it in style
If you ever end up with a popup camper, Popup Portal is a deep hive mind that can tell you pretty much everything from the most basic tips to walking through complete rebuilds. Now the Starflyer (I can’t improve on the name that Starcraft gave it) doesn’t need anything close to a complete rebuild, but there are a few maintenance issues that the previous owner (and perhaps those who came before) neglected. The Portal has been very helpful in that regard.

One thing the hive mind recommends for new popup owners is to do what they call “Camp Driveway.” In other words, set up the camper in your driveway or back yard, and spend the weekend in it. You get to test it out, and figure out what you need before you go “live.” Mason was wanting to try out the new camper, so I opened it up and Camp Driveway was on!

Fortunately, I’d ordered a bunch of accessories from Amazon—an extension cord, an adapter to plug an RV into a house outlet, leveler, heater, 12V LED bulbs (they’re brighter and draw less power, important if you’re using a battery for lighting) and a few repair and maintenance things. I was pleased to find that everything worked as intended. The interior lights did a fine job of illuminating the camper, the stove fired up once the air got worked out of the lines, the outlets were happy to charge my phone and Mason’s tablet (and keep a night light glowing). The “Little Buddy” heater, which uses the same small propane cylinders as lanterns, was a big help because the electric space heater that came with the camper wasn’t too helpful. With both heaters going, the digital thermometer I brought along inched up to about 67°F at tabletop level (not nearly as warm along the floor, though!). But still, with the beds a little higher yet, I figured that was going to be just fine. Besides, we had the same sleeping bags we used for Mason’s Polar Bear Camping outing a couple years ago. If we kept warm enough in an unheated tent, a popup with (some) heat would be at least as warm.

It was. My first night was restless, with the electric heater kicking on and off every 15 seconds or so, but I stayed warm enough. Mason, wrapped up in the down mummy bag, had no trouble sleeping at all. For us old farts, I think we’ll need a memory foam topper on our bed. The camper came with a literal Porta-Potti, a little self-contained toilet that sits in a cabinet during the day and Only Comes Out At Night. It turned out to be very handy—after I turned off the Little Buddy at bedtime, the temps inside the camper dropped to around 55°F, but that was still better than the 34°F outside. Especially if you had a post-midnight necessity.

In the morning, putting a kettle on the stove and cooking bacon&eggs helped to warm things up. The French press I bought myself for my birthday finally got its first run, and there’s nothing like a good strong cup of coffee on a cold morning. The Starflyer has fairly primitive plumbing—a hand pump at the sink, and no hot water heater—but the Popup Portal hive mind had a solution for that. Get a pump pot, fill it from the kettle in the morning, and you’ll have hot water to wash the evening dishes (and an afternoon coffee, if necessary). Actually, we used bottled water, since I’d put RV antifreeze in the water system to prevent serious issues until spring.

The second night went better for me; I turned around to put my head toward the center of the camper, and for some reason I found that more comfortable. I left the Buddy Heater going until it emptied its canister, which saved me the hassle of getting up and turning it off. It went a little longer than I expected, which is nice. We got to air out the bacon smell for a few hours, and I folded up the Starflyer as the first sprinkles came in mid-afternoon.

Camp Driveway was a success. I came out with a list of stuff we need, and am holding out some hopes of hitting a local campground next month when Mason has another no-school Friday. A 3-1/2 day weekend would be a nice warmup to our Spring Break trip to Mom’s…

Wednesday, January 02, 2019 No comments

Campy New Year!

I think a lot of us are relieved to see 2018 in the rear-view, and perhaps are directing a forest of Meaty Middle Fingers its way. But it had its moments. Charlie’s continuing to learn new signs, even if he isn’t speaking out loud yet, and is starting to put two-word sentences together (often things like “eat sandwich”). At any rate, the year ended well.

I’ve been looking for a popup camper for the last couple months. The wife is on board—she won’t tent-camp, but she actually encouraged me to buy a (far smaller and less-equipped) popup some years back. The money didn’t shake out then, but a couple months ago I had a surprise moneybomb—the workplace is being acquired, and I’d had a standing order to sell some stock if it hit $30. So, all of a sudden, the hunt was on. I set a budget, found Pop-up Portal, and started learning all I could from a deep hive mind.

Searching Craigslist, I immediately found one local to me; it was 20 years old, but solid and a lot roomier than I remembered them being when the parents rented one (the slide-out dinette probably had a lot to do with that). The price was well within my budget.

There were snags, though, and it was probably all for the best. I thought I’d set up a transfer from the broker to my checking, but I hadn’t, and doing the setup (of course) took longer than I wanted it to. I was annoyed with myself, because I felt like I was stringing the seller along, and told them to go ahead and sell it if someone else came by with cash in hand. Meanwhile, I used the time to research what I could. Good thing: turned out our vehicle can pull 2000 lbs, and the camper weighed in at 2600. That wouldn’t have ended well.

Off to Craigslist again. This time, I had a specific set of criteria. Absolute requirements: 1800 lb or less, A/C (Planet Georgia summers can be horrid without it), camp-ready. Nice to haves: 1600 lb or less, a toilet, full 12V setup. The latter is not a given; all the sellers I talked to always camp at places with full hookups and don’t have battery power hooked in.

After tossing obvious scams, newer campers that were way over budget, and big amenity-laden models that blew away my weight allowance, I ran out of local options. Expanding my search radius turned up a promising find that checked all my “must” and “want” boxes, but it sold before I had a chance to go look at it. Another one turned out to be a scam (“I sent it to an eBay dealer in Omaha who will deliver it for free”)… yeah, right. I reported that one to the FTC. There were a couple of promising leads in Alabama and South Carolina, but the logistics (especially around the holidays) and the weather just wouldn’t cooperate. I decided to give it a week and see what happened next, and seriously considered upping my budget.

So Friday, a new listing, um… popped up. It was slightly over budget, but I thought “hey, that map looks familiar.” Turned out it was local! I called to check it out on Saturday, and the seller said “I thought that listing went away. But I’m on my way over to the storage unit now, we can meet there.” It was, like many of the days have been around here, rainy and crappy, but we did crank up the top so I could have a look at the not-actually-canvas (it’s called Aqualon™). It was intact, if slightly grimy.

He said, “the rain is supposed to let up tomorrow, why don’t I bring it over to your place and we can set it up?” Sounded great by me, especially since our car has a hitch but no wiring just yet.

So here he came, in a gigantic diesel 4-door pickup (white, imagine that), big enough to pull a gooseneck trailer, with a 1500-ish pound popup behind. I doubt the truck even felt it. Negotiating our horrid driveway involved him rolling his front wheels onto the grass, which dug some pretty deep divots. Couldn’t be helped. We unhooked and pushed it in front of my Miata, then commenced to setting it all up.

It was less grimy inside than out, except for the floor and ceiling. The upholstery is intact, and there’s already an outdoor rug—one less thing to get. There’s also a space heater and a case and a half of bottled water. I worked the hand pump at the sink, and to my surprise water came out. Turned out the 10-gallon water tank had about 3 gallons in it.

2001 Starcraft Starflyer
Long story short, he knocked the price down to exactly my budget, and I cut him a check. We had a break in the rain today, so I spent much of New Year’s Day attacking the ceiling and A/C unit (I don’t think anyone ever cleaned those filters) with disinfectant wipes while Mason cleaned up the beds with a Dirt Devil.

The dining table is the size it is, because it doubles as a spare bed (spanning the dinette benches), but it makes things a little tight. I’d like to include something narrower for our trips. There are a few minor repair items to address as well, but it’s supposed to be sunny this weekend. Mason is already wanting to set up and sleep in it. Charlie likes clambering around in the bunk ends as well.

I’ve got it folded up for now, because I needed to get the Miata out of the garage tomorrow. Still some cleaning to do—mainly the cabinets on one side, vacuuming under the seating area, and scrubbing the floor. I’m going to have to graft in a battery system, because a couple places I want to take it don’t have hookups. Holiday’s over, but we’ll have a few of our own holidays in the months to come. Sooner than later, I plan to clean up the other side of the detached garage so it has a dry place to live.

For the future, we may do some remodeling. I’m looking over Pop-up Princess for ideas. For now, I’m digging on the geeky model name, “Starflyer.” Not only did it come with a name, the shelf in the king-bed front bunk is called a “Space Station.” I added a bunch of accessories to my Amazon wish list, as much to remind me what to get as anything else.

So we should have some new vacation destinations in 2019. I’ll be glad to share. Maybe I won’t have to burn off a bunch of vacation time at the end of each year…

Wednesday, December 12, 2018 No comments

Adventures of a #techcomm Geek: Blurrier Image

In today’s installment of Life of a #techcomm Geek, we return to a subject that draws this geek like a moth to flame: file conversions. Hazardous, yet compelling. Lots of geeky stuff follows…


I’ve had this particular line in my Tines to-do list for a while. As part of our transition to a new documentation system, I and another writer handled the conversions. We had a high-end tool to help us out, although creating rules was a dicey proposition and the vendor ended up helping (we made tweaks where they could make an obvious difference, though).

In the most recent round, we got to the FrameMaker-based docs. Frame (as its users often nickname it) is unique in that it allows overlaying callouts and other graphic elements on top of images. This is a huge help for translating manuals, because the writers don’t have to maintain a separate set of graphics for each language. Anyway, since the new system isn’t FrameMaker, something else had to happen. The conversion system could be configured to either flatten the images (convert to a PNG, rasterizing the callouts) or create an SVG (Structured Vector Graphics). We chose the latter, thinking that since SVG is an XML format, the new system could maintain them easily.

We were wrong.

Long story shortened considerably, we eventually threw up our hands and decided to convert all the SVGs to “flattened” PNG files. The writers would keep the SVG files on their hard drives to make changes, then upload a new flattened PNG when needed. I wrote a script to do the deed; it crunched through hundreds of SVGs at about one per second, and updated all the links in the book to point to the new PNGs.

All well and good, until one of the writers went to publish. “The images look blurry,” she told me. Taking a look, she was obviously right. It took me about three seconds to figure out why.

You see, our SVG files have a width attribute, which was set to the width in the original FrameMaker files (a typical width is 576 pixels, which at 96dpi is 6 inches even). All well and good, but the original images run about 1200 pixels wide—so in essence, we were throwing away over ¾ of the image data when doing the conversion. No wonder it looked blurry! But we were all weary of messing with it by that point; I had written scripts that:

  • extracted embedded images from an SVG, converted them to PNG, then changed the link so the SVG referred to the file instead
  • went the other way, embedding images in an SVG
  • converted the entire mess to PNG in one swell fwoop

The documentation work that was my primary job function had been back-burner’ed for too long. I added an “investigate this further” item to my backlog list and got back to the bread-and-butter part of my job.

This week, I all but cleared a fairly long to-do list in three days, so I thought maybe I could give this thing another shot. A quick Google turned up some promising code on superuser.com; I divided the image width by the scaled-down width in one SVG, applied the script, and got a nice sharp image! The only problem with that is, it would take about 10 minutes to do each file by hand, and there are hundreds. A script is the only practical way to blast through all of them.

When I tackle a situation like this, I tend to use a shell script to drive awk, Perl, and XSLT scripts. Each has its strengths, and trying to force (say) XSLT to work some of awk or Perl’s string-processing magic is more trouble than it’s worth. And vice versa. So… XSLT to extract the file name and (scaled) width, awk to parse the output of file (a utility that returns the dimensions of an image file) and do the calculations, all wrapped up in a shell script to conduct the Geek Orchestra.

Of course, I ran out of time this afternoon to put the whole thing together, but I have all the sub-script logic down. I just need to score the symphony. That will likely take me to noon tomorrow, then I’ll be back to bugging people already bogged down with too much stuff to lend me their expertise.

I also achieved Inbox Zero at work today… and that’s a rant for another time.

Friday, December 07, 2018 2 comments

A TB02 of sorts…

A long time ago, back when The Boy had more than his share of teen angst to deal with, I had a series of “TB” error codes. TB02 was “He moved back home (again).” (Dang… this blog is old. 13 in Internet years is like “going out for lunch meant we hunted wild tacos with spears.”)

Fast-forward to now. He’s married, living in his own house, starting a business, and doing a decent job of adulting. Unfortunately, he ended up with some health issues that put him in the hospital for the better part of two weeks (not his foot this time). During that time, his wife & his mom got together and really kept things going, spending days and nights with him, making sure he was being taken care of—I was thrilled at how well they worked together. Still, he was bored $#¡+less, and was more than ready to get outta there and get back to his life.

Yesterday, they sprung him, but with a condition: he can’t be left by himself for a week. The daughter in law has to work (hey, I totally understand, because I do too)—so he’s here at FAR Manor. He’s not really moving back in, just hanging out with us for a week, so it’s not a real TB02. I’m sure Mason is happy to have him around, because he was supposed to stay with his dad for a few days Thanksgiving week, but with one thing or another, I haven’t gotten home before Mason was asleep in bed.

Yeah, The Boy missed Thanksgiving, but I think we’re going to have an extra dinner this weekend. After all, we really have something to be thankful for this time.

Wednesday, December 05, 2018 No comments

When you go to the delicatessen store…

I’m one of those people who like liverwurst. Always have. I gave it up for a while, what with the weight gain and high blood pressure, but Boar’s Head came out with a lite version the has lots less fat and sodium, and is still pretty tasty.

A few weeks ago, I got a quarter pound. As the deli guy was slicing it up, I thought, “Hey, Charlie likes food with this texture. I wonder if he’d like this.” So the next evening, I made him a sandwich and offered the corner.

NOM!
Charlie likes sandwiches okay. But when he got a taste of this, he grabbed it out of my hand and gobbled it down. Now up to this point, whenever he got hold of a sandwich, he would open it up, remove the meat, and eat the bread. Not this time, or any time since! The experiment was a roaring success, and I might have got one sandwich out of the batch.

So I found myself at the grocery store a few days later. I got half a pound this time, figuring maybe I could sneak a sandwich or two for myself. I came home and told the wife I got Charlie and me some liverwurst. Charlie heard this, and pushed me into the kitchen. “It doesn’t matter if I just ate or not, I want some of that good stuff!” Next time, Charlie was with me, and he got the sample slice (plus a slice of beef bologna, which he also liked pretty well).

Once again, we were out. I picked up Charlie from daycare on the way home from work this evening, and decided to grab a whole pound this time (because I still only get two sandwiches out of a half pound after Charlie gets through with it). We headed toward the deli, and he pointed and hooted, remembering how he’d scored a freebie last time. Once again, he got the sample. He finished it while they were slicing the cheese, and he signed “more.” Sure, why not? A couple pieces of liverwurst won’t hurt anything.

But he wasn’t through. As I rolled through the store on the way to grab a box of diapers, he wanted another piece. And another. And one more at the checkout. Then, when we got home, he devoured all but two bites of a peanut butter sandwich.

So when you go to the delicatessen store, grab another pound of liverwurst for Charlie and me. What we have now won’t stay around long.

Monday, December 03, 2018 No comments

Mason Minecraft Mondays

Mason took to Minecraft like a natural-born bricklayer. He comes up with some rather interesting constructs from time to time, and we’ve talked for a while about posting some screenshots. Today’s the day…

The aerial view of his seaside croft, built around a waterfall. Left to right: barn, house, garden.



This is the barn at the entrance. Mason tells me the chimney-looking thing on top is decorative. I suppose it makes it easier to spot from out at sea.


Over on the other side of the house is the garden. The stream runs alongside it, leading to the waterfall. This POV is over the stream, looking toward the ocean.


In the house, Mason has a spacious kitchen. His rooms tend to be large, and why not? In real life, it would give him more room to run around flat-out, with Charlie right behind him.


After filling up on pork chops and a variety of fresh veggies, and racing around the place, perhaps a nap is in order. The bedroom is appointed with the necessities. Left to right: computer, bed, storage containers for clothing and such.


Looks like a peaceful place to spend a long vacation to me. When I come back, I’ll bring you some more Mason Minecraft Mondays.

Thursday, November 29, 2018 3 comments

It Don't Mean a Thing

Some cleanup required
I was bonking around in the garage Sunday afternoon, not doing much important, when I ran across Mason’s old porch swing. “Too bad I don’t have anything to hang it on,” I thought. “Charlie might like to swing in it.”

Then I remembered…

Some years back, we had a yard swing. It moved between the front and back yards as the whim struck whoever was sitting in it, until a bored and unsupervised Skylar destroyed the canopy with a stick, along with the sling that kept the upholstery against one’s sitting parts. The frame sat in the back yard, until someone decided to raid it for the hardware. The pieces have been sitting out back ever since.

With Mason looking on, I started to work on the jigsaw puzzle; it clicked after a couple minutes. Next was to find suitable hardware: 3” bolts and nuts. Amazingly, the first drawer I looked in had the bolts, and they were the perfect thickness! Could it really be that easy?

I've been framed!
Anyone who has followed this blog for a while knows the answer: nothing at FAR Manor is that easy. The bolts had two different thread pitches—finding nuts for one pair was easy, the other… not so much. But I refused to believe I had bolts without matching nuts somewhere. Finally, a prolonged scrounging session turned up one, then another, along with a set of bent washers (meant to follow the contour of a pole), so that was useful.

It took far longer, of course, to find the parts than to assemble them. I used a couple disinfectant wipes to clean off the swing bucket, then hung it on the frame. The bottom of the swing was about three inches off the ground, if that. So I pulled the ropes out of the bottom and tied them to raise the swing off the ground.


It works, Granddad!
With that, Charlie tried out the swing and seemed to enjoy it. It’s now sitting next to the gazebo.

I’m not done with the project just yet. My first thought was to hacksaw about 18 inches off the top bar to bring the hooks a little closer together. Wife had another idea… which I hope to show in Part 2.

Friday, November 02, 2018 3 comments

Friday Charlie blogging

Charlie knows it’s important to accessorize when you’re hitting the town on Friday night…

I’m going to regret this when I’m older.
A big string of shiny beads—and, of course, Mason’s colorful undies as headgear!

Note: He did this without my help or encouragement. I just took the picture afterwards.

Wednesday, October 24, 2018 3 comments

The World's Cutest Pirate 2.0

Six years ago, Mason was the world’s cutest pirate.

Well, Charlie has to try to do everything Mason does, so…


The kids at church did a “reverse trick or treat” (in which the kids dropped off treats for the seniors) at a local assisted living center over the weekend, which explains the background. Charlie, of course, charmed many of the residents with his sunny disposition and curiosity. I was surprised that he mostly kept the headscarf on.

His granddad is still ready to plunder some booty, if he gets the chance…

Tuesday, October 23, 2018 No comments

(Partially) Disconnected

A couple weeks ago, I noticed my phone was starting to discharge a lot faster than normal. Thinking I had issues with an app not being cooperative, I checked the app consumption levels in Settings and made a couple of adjustments. I usually could get a day and a half out of my phone with normal use, plugging it into the car charger on the way in or out of the office if needed. But it got to where normal use gave me about five hours of battery life.

I finally set up a call with Apple support, and the tech set me up with a repair ticket. In case you weren't aware, Apple is replacing batteries (if needed) on certain iPhone models (including iPhone 6, my particular phone) for $29… and $5 shipping if you do it by mail instead of bringing it in. Seeing that a DIY battery replacement was $25 about three years ago, I figured this was a no-brainer.

Fits in the palm of your hand… with room to spare.
I was now temporarily phone-less. Or was I? When I got the 6, I retired my iPhone 4, the one I'd replaced the battery in, repurposing it essentially as an expensive iPod touch. The SIM won't fit in it, which I expected, so it’s Wi-Fi only. I can still message the wife and DD, and even make and take calls using FaceTime. I was hoping to use it for Skype, but the app only gives you the option to upgrade and the current version won't work on the older phone. (thankyouverymuch, Microsoft)

Whatever. Where there's Wi-Fi, there's the ability to contact family, anyway. I spent the weekend weeding off old pictures and older messages (this phone was in service from 2012 to 2016), and got a GB or so freed up to download podcasts for the commute. I'll probably start deleting apps soon, starting with Twitter—it crashes too often, and of course I can't upgrade it. Next up will be stuff I never use or works equally poorly. That should get me through the week, then I should get my primary phone back.

Quite the size difference
One nice thing is getting re-acquainted with several games that are no longer supported on the newer systems—Bejeweled 2 and Sudoku Mania, to name two. Some newer games still work on it as well… Smash Hit is a surprising example that does occasionally hit a frame-rate stutter. But it feels so tiny, reminding me of my skepticism about a phone that was too long to nestle down into a shirt pocket. I guess I adjusted quickly.

The other thing I like is the speaker dock. It, like the 4, has the older dock connector. So I can't put the new phone on it. I guess when I get my primary phone back, I'll erase the old one and find someone who needs it more than me. They can also take the speaker dock, since it doubles as a charging station.

But it'll be nice to hang out with the '4 for the week ahead. Our last hurrah, so to speak. Charlie glommed it this evening, and was adamant about not giving it back, so I pulled up the Bubbles app for him (one of those that doesn't work on newer phones) while he clung to it and fussed. (I guess he figured a little bitty phone is meant for a little bitty user.) He played with it for half an hour, maybe more. I remember letting Mason play with the phone when he was like 3 or 4, and he discovered the Camera app. I locked my '6 when I got it, but he had access to an iPad mini (and an original iPad) by then. He still tries to wheedle my passcode out of me, though.

I had a bit of heartburn this evening, when I received a shipping box from Apple (2 days after I sent the phone off!). I got on the chatline with Apple Support, and they verified the box had been shipped by mistake and everything was in the queue. Oh well, now I have a SIM remover tool… no more paper clips!

'Course, this means I'll be hard to reach this week. Email me… or leave a comment here!

Wednesday, September 05, 2018 2 comments

The Greatest Rev

Mason’s latest obsession is cars. Muscle cars, sports cars, supercars, anything with eye-popping horsepower and price tags (and insurance quotes to match). Getting in any car with him means being subjected to an endless monologue about this car or that car he’d really like to see (or own), punctuated by excited shouts as he sights a Porsche or the like. I presume he has fallen into a sea of Youtube videos. eyeroll

So I was taking him to soccer practice, and he said, “Rev it!”

“This car?” My Miata has stock exhaust, and it is in very good shape. Even if the redline is around 7000rpm, it doesn’t make all that much noise. But if I was a Sheltie in a previous life, Mason was a bulldog. “What’s the greatest rev you ever did?”

Ours was grey-green, but otherwise the same.
Source: Wikimedia Commons
“I didn’t do…” then I burst out laughing, remembering what was truly my greatest rev. I told him the story:

When I was in high school, we had a 1971 Buick Electra 225 “Deuce and a Quarter,” the car Sinbad immortalized in a comedy bit (see below). Thing was, he wasn’t exaggerating much. It was one of the last pre-gas shortage Detroit big-iron beasts, with a huge engine to match (455cid, almost 7.5l in modern measurements… over four times the displacement of my Miata!). That thing could swallow enough cargo to choke some SUVs these days, and give a full-sized RV a run for its money when it came to guzzling gas. And it could get out of its own way fully loaded, let alone carrying only a 140-pound me behind the wheel. The SOB probably could have pulled a fifth-wheel without breathing hard, if we could have found a way to hook it up.

The best memories of my high school years revolve around that car. If I get some requests in the comments, I'll tell some other stories about it, but this one is about my greatest rev.

I lived in Michigan until graduating from college. For those of you who aren’t familiar with the way they do things Up North, you can’t just put everything on hold until the snow melts; it might stick around until April after all. So you plow the roads, and throw down rock salt to melt the ice (or salt and sand, the latter to give you traction if it’s too cold for the salt to work). In quiet subdivisions, I’d gas it hard around corners in the winter—ostensibly to get practice recovering from a skid, but in reality to dick around. But I digress. The thing about salty roads, it rusts iron. Rustproofing had become a thing in the mid-70s, and Dad had it undercoated.

But that was just the chassis, not the muffler pipe. Somewhere around the summer of 1978, the salt completed seven patient winters of work, and the long stretch of pipe between the exhaust manifold and the muffler rusted through.

You’ve probably heard a Civic (or a similar car) with a modified exhaust, or some ding-a-ling just put in a straight pipe. Now, imagine the racket coming from an engine four times that size. It didn't take much revving to make that thing HEARD. Mom literally could hear us coming home from a mile away.

It had to happen, sooner or later. I dropped a friend off around midnight, in a quiet-ish Grand Rapids neighborhood, and told the land yacht to set a course for home. I tried to go slow to minimize the BLAP BLAP BLAP BLAP of the unmuzzled V8, but I got the blue lights after about two blocks. The cop wasn’t horrible about it; he wrote an R&R (Repair and Report) ticket, which meant I had a week (or two) to fix it, then take it up to the cop shop and demonstrate it was fixed.

Other Brother tried the easy route: cutting the ends off a beer can, then opening it sideways and wrapping it around the rusted-through zone (by now, the pipe had come apart). It worked! for about ten minutes, until the heat of the monster V8’s breath melted the aluminum.

I decided that since I’d gotten the R&R, it was up to me to fix it right. Somehow or another, we knew the diameter of the muffler pipe. I went to the auto parts store, bought two splices and a length of replacement pipe. I hacksaw’ed out the rusted part, plus enough to fit the replacement length, applied splices and clamps, and gave it a test. Just a hum, the way Buick intended. I took it to the cop shop, where they approved my fix. As well they should have—it outlasted the rest of the car.


And now, I will shut up and let Sinbad tell you all about the Deuce.


LinkWithin

Related Posts Plugin for WordPress, Blogger...